8085 Simulator v1.5 serial key or number

SWiSH v Serialkey preview: D3C6 9B24 FE5E 24 Added: ; Downloaded: 5 times; Rating: 50 %; Submitted by: anonymous; Full 1 Dec Don't dismay because now there's a wonderful program called SWiSH v! With SWiSH v you'll be creating great animations to rival Flash! 22 Dec Smart-Serials - Serials for Swish v2 unlock with serial key. SWiSH v is a Flash tool that allows users to create animations with sound and special effects for use in web pages. Top Recommended Action: records Swish v site key serial numbers, cracks and keygens are presented here. No registration is needed. Just download and enjoy. records Swish v esp serial numbers, cracks and keygens are presented here. No registration is needed. Just download and enjoy. Smart-Serials - Serials for SWiSH v unlock with serial key. 14 May 24 Oct SWiSH v2 is the first major upgrade since SWiSH was born. There are hundreds of new features for you to play with. Download the FREE 15

Lab Area:  Sqfeet

Room Number: EC

Lab Faculty: Er Vinay Kumar

Lab Instructor: Mr Tejveer Singh

Lab Staff: Mr Ram Gopal

Courses Covered

• REC Microprocessors & Microcontrollers Lab
• RIC Microcontrollers For Embedded Systems Lab
• EC Microprocessors Lab

LIST OF EXPERIMENTS

Microprocessor and Microcontroller Lab (REC )

1. To study microprocessor system.
2. Write a program using and verify for subtraction of two 8 bit hex numbers and store result at H.
3. Write a program using and verify for addition of two 8 bit numbers and store the result at H.
4. Write a program using and verify for:
a) Addition of two 16 bit number using register pair.
b) Addition of two 16 bit number directly.
5. (a) Write a program using to multiply an 8 bit numbers stored in A by two (decimal) & store result in BH.
(b)Write a program to divide an 8-bit number stored in location A by two (decimal) & store result in BH.
6. Write a program using to store 16 bit of data in memory location at to F. Transfer the entire block of data to new memory location starting at H.
7. Write a program in which six bytes of data are stored in memory location starting at H and add all data bytes. And use register B to save any carry generated while adding data cromwellpsi.com DATA=A2,FA,DF,E5,98,8B.
8. Learn and understand how to configure MSP-EXPG2 Launchpad digital I/O pins. Write a C program for configuration of GPIO ports for MSP
9. Learn and understand how to configure the PWM and ADC modules of the MSP-EXPG2 Launchpad to control the DC motor using external analog input.
Understand and Configure 2 MSPF Launchpad in master-slave communication mode for SPI protocol.
Implement Pulse Width Modulation to control the brightness of the on-board, green LED. This  experiment will help you to learn and understand the configuration of PWM and Timer peripherals of the MSPG
Experiments Beyond the syllabus:
1. Write a program to Interface GPIO ports in C using MSP ( push buttons)
2. Write a program Interface potentiometer with GPIO.
3. Write a program of PWM based Speed Control of Motor controlled by potentiometer connected to GPIO.

Control System Lab – RIC

1 Different Tool boxes in MATLAB, Introduction to Control System Tool box.

2. Determine transpose, inverse values of given matrix.

3. Plot the pole-zero configuration in s-plane for the given transfer function.

4. Determine the transfer function for given closed loop system in block diagram representation.

5. Plot unit step response of given transfer function and find delay time, rise time, peak time and peak overshoot.

6. Determine the time response of the given system subjected to any arbitrary input.

7. Plot root locus of given transfer function, locate closed loop poles for different values of k. Also find out Wd and Wn for a given root.

8. Create the state space model of a linear continuous system.

9. Determine the State Space representation of the given transfer function.

Plot bode plot of given transfer function. Also determine the relative stability by measuring gain and phase margins.

Determine the steady state errors of a given transfer function.

Plot Nyquist plot for given transfer function and to discuss closed loop stability. Also determine the relative stability by measuring gain and phase margin.

Beyond the syllabus

Introduction to Simulink.

To obtain the transfer function of a system using Simulink.

 List of Recent Lab Equipments

I-MOB – LED MICROPROCESSOR TRAINER KIT

Based on CPU operating at MHz crystal frequency.8K bytes of EPROM loaded with powerful monitor program. 8K bytes of RAM available to the cromwellpsi.com on board memory expansion upto  64K bytes using //// with 1 socket of 28 cromwellpsi.com mapping definable by the user bit programmable TIMER/COUNTER using programmable I/O lines provided   through RSC interface through SID/SOD Lines with Auto baud cromwellpsi.com modes of commands: Hex Key pad mode USBInterface to connect kit to computer.V-USB Terminal Software to operate kit from USB Port to execute all commands like Examine Memory, Execute, Assembler, Dissembler & etc. No components provided on board, only circuit diagram printed on cromwellpsi.com address, data & control lines are   buffered and made available at the edge connector as per STD bus   configuration/28 key hexadecimal keyboard and six seven segment displays through Powerful  software  commands like  Relocate, String, Fill, Insert, Delete, Block Move, Examine/Compare   Memory, Examine Register, Insert Data, Delete Data, Single Step, GO, Break Point in both Serial & Keyboard mode. Facility for Downloading/Uploading files from/to PC. In-built Power supply. User's Manual.

I-MOB – LCD MICROPROCESSOR TRAINER KIT

Based on / Microprocessor. Onboard assembler & disassembler. 16K Bytes of  EPROM Loaded with monitor expandable to K Bytes using with commands like Assemble, Display or Modify Data, Unassemble, Trace, GoK bytes of CMOS RAM expandable to K Bytes using / 72 I/O lines using three nos. of

8 different level interrupt through Three 16 bit Timer/Counter through /Keys IBM PC Compatible ASCII Keyboard. 20x2 Liquid Crystal Display. RSC Port using USB Interface to connect kit to computer.V-USB Terminal Software to operate kit from USB Port to execute all commands like Examine Memory, Execute, Assembler, Dissembler & etc. No components provided on board, only circuit diagram printed on cromwellpsi.com address, data and control signals (TTL Compatible) available at edge   connector as per Multi Bus.  The kit   also has its own Resident cromwellpsi.com-built Power Supply. User's Manual.

I-MOB

/51 MICROCONTROLLER TRAINER KIT

Based on / operating at 10/12 cromwellpsi.com board 8K RAM. Battery backup for RAM area.8/16K bytes of EPROM with powerful monitor cromwellpsi.com memory expandable upto K Bytes using four 28 pin sockets. 48 I/O lines using 2 nos. of Two External interrupts INT0 & INT keys Hexadecimal Keyboard and  six Seven Segment displays.

USB Interface to connect kit to computer.V-USB Terminal Software to operate kit from USB Port to execute all commands like Examine Memory, Execute, Assembler, Dissembler & etc. No components provided on board, only circuit diagram printed on cromwellpsi.com interface using Auxiliary  RSC using serial pins of 80C All data, address and control signals (TTL compatible) available at FRC   connector. Software commands like INSERT, DELETE, BLOCK MOVE, SET/CLEAR BREAK POINT, SINGLE STEP, EXAMINE THROUGH REGISTER, EXECUTE, EXAMINE,   MODIFY, PROGRAM/DATA/INTERNAL MEMORY   cromwellpsi.coming/Downloading facility from PC in Intel Hex cromwellpsi.com-built Power Supply. User's Manual.

INTERFACE MODULE

Interface Module -(ALL IN ONE). Burge strip F-F connectors, ADC & DAC interface module. Stepper motor interfaceDC Voltage & current  Measurement interface module

Traffic Control interface module. 4X4 Keyboard matrixS51 programmer with USB Programming facility .Required Software, USB cable

ADVANCED MICROPROCESSOR TRAINER

This is a Microprocessor based product designed to teach students about architecture and its programming techniques. This provides a very simple and user friendly platform for students so they can learn about Microprocessor architecture and implement their own ideas with different peripherals provided on board. Practical experience on this board carries great educational value for science and engineering students., It should have following features: Diagrammatic representation of full system, Powerful monitor program, Battery backup for RAM, Three channel Timer/counter using , 48 I/O lines using , On board EPROM programmer for 27 series, On board 8 channel ADC, On board DAC, Facility of downloading and uploading the files from PC., Two command mode interface, ASCII Keyboard, Serial Mode, All Address and Control lines are available on 50 pin Connector. It should have following Technical Specifications: Operating Frequency: MHz, ROM: 8 K, RAM:  8K,Input:  ASCII Keyboard, Display : 20 X 2 LCD, Power Supply: V - V AC, 50Hz, Operating Conditions˚ C, 85% RH, Learning Material: Online (Theory, procedure, reference results etc)Scope of Learning: Study of architecture, assembly language programming, Interfacing of with ADC, Interfacing of with DAC, Peripheral interfacing

ADVANCED MICROPROCESSOR TRAINER

It should have following features :Diagrammatic representation of full system, 72 I/O lines through , Powerful monitor program, Battery backup for RAM, Three channel Timer/Counter using , On board 8 channel ADC, On board DAC,Two modes of operation, Keyboard mode, Serial Mode, Facility of downloading and uploading the files from PC, All Address and Control lines are provided on 50 pin connector, It should have following Technical Specifications: Operating Frequency : 5 MHz, RAM K, ROM : 16 K, Display : 20 X 2 LCD, Input : ASCII Keyboard, Mains supply : 90 - V AC, 50 HzIt should performed following experiments: Architecture, Assembly language programming, Interfacing of with ADC, Interfacing of with DAC, Working and interfacing of Math coprocessor, Working and interfacing of I/O Processor, Peripheral interfacing

Interface 1  Key board & Display Controller

Interface 2  Programmable DMA Controller

Interface 3  Prog. Peripheral interface

Interface 4 Stepper Motor Controller

Interface 5 Traffic Light Controller

Interface 6 Temperature Measurement

ADVANCE  MICROCONTROLLER BOARD WITH JTAG DEBUGGER

GPIO BOARD

All-in-One GPIO Board: The All-in-one GPIO board is specially designed to suit the experimentation of different GPIO devices with the micro controllers,  On board display options includes 8 LED, 16x2 character LCD, 2 digit 7-segment display, Switches includes 4 general purpose keys and 2X2 matrix keyboard, EEPROM Based on I2C and SPI for protocol demonstration experiments, Stepper motor and DC Motor interface, Relay output,  Facility to provide 2 channel ADC in put using potentiometer and unity gain amplifier for protection, Compatible with different educational practice boards and Arduino Board, Useful resource to learn basic programming techniques to interface basic GPIO components to the controller,

DEVELOPMENT BOARD FOR MSP WITH ACCELEROMETER

Educational Practice Board for MSP features MSPF CPU working up to 16MHz,

16KB Flash, B RAM, 8 Channel bit ADC (Sampling Rate: KSPS), On board 8 bit DAC with fix reference voltage as well as variable reference voltage provision, On board 6 pin relimate connector for SPI, On board 4 pin relimate connector for I2C, On board 3 pin relimate connector for 2 channel analog voltage input, On board 10K potentiometer for ADC input, On board TTL UART connector to interface various sensors, On board I2C connector to interface various sensors, On board 20 pin FRC connector to interface GPIO devices, On board dual inline PTH to interface various signals, Accelerometer for MSP

DEVELOPMENT BOARD FOR MSPF

USB-enabled MSPF bit MCU: Up to MHz System Clock, V to V operation, KB of flash, 8KB of RAM, Five timers, Up to four serial Interfaces (SPI, UART, I2C), bit analog-to-digital converter, Analog comparator, Integrated USB, with a complete set of USB tools, libraries, examples, and reference Guides, The eZ-FET lite emulator, with the application ("backchannel ") UART., Ability to emulate and develop USB applications with a single USB cable, made possible with an onboard USB hub, Power sourced from the USB host. The 5-V bus power is reduced to V, using an onboard dc-dc converter, Both male and female pin Booster Pack plug-in module headers, configured for stacking. pin Booster Pack plug-in modules can also be attached,Compatible with the pin Booster Pack plug-in module development tool standard.

WI-FI CC WIRELESS NETWORK PROCESSOR KIT

Wi-Fi CC wireless network processor Kit: CC Wi-Fi Network Processor in QFN package, Industry’s first devices to be Wi-Fi CERTIFIED™ at the chip level by the Wi-Fi Alliance™, 2 pin stackable connectors (Booster Pack headers) to connect to TI Launchpad and other Booster Packs, On-board chip antenna with option for cromwellpsi.com-based testing , Power from on-board LDO using USB OR V from MCU Launchpad, 2 push buttons,  4 LEDs , Jumper with Ohm resistor for current measurement, megabit serial flash, 40 MHz crystal, 32 KHz crystal and oscillator,  cromwellpsi.com and chip antenna,  USB, 4 Layer PCB with 6 mm spacing and track width, All the Specifications mentioned in the Tender inquiry are CC chip features and will be supported by Wi-Fi CC wireless network processor Kit.

IOT DEVELOPMENT PLATFORM

Specifications for Smart IoT: Different variety of IOT Nodes featuring Three ARM Cortex-M3&Two Cortex-M4 demonstrate various features like Ethernet, USB, Sensor interfacing, UART, I2C, SPI etc. These nodes enabled to user to learn sensor interfacing and peripheral programming required for IOT application, One unit of Embedded Gateway with HDMI and Ethernet connectivity, USB ports, on board Wifi, on board Bluetooth. Quad Core GHz CortexA53 64bit CPU, 1 GB RAM. The embedded gateway should be able to connect to the nodes and transmit data to the cloud. The necessary image containing cloud services compatible for IoT should be ported on the board. Also the procedure to configure the same should be provided to end user., Five unit of All-in-one GPIO board designed to suit the experimentation of IoT applications to be provided having following features, On-board display options includes 8 LED, 16x2 character LCD, 2 digit 7-segment display, Switches includes 4 general purpose keys and 2X2 matrix keyboard, I2C and SPI based EEPROM, Stepper motor and DC Motor interface, Relay output, Facility to provide 2 channel ADC input using potentiometer and unity gain amplifier for cromwellpsi.commentation using AWS (Amazon Web service) along with the provided nodes featuring real time IOT experimentation., Voice enabled control using Amazon Alexa enabled Echo Dot with provided node hardware., Experimentation using Google Cloud VM along with the provided nodes featuring real time IOT experimentation., Voice enabled control using Google Assistant Application on Android OS. One unit of Router with power supply, A Bluetooth module for connecting the node to embedded gateway., A portable sensor kit with facility to interface temperature-humidity sensor to log data on IOT gateway using Wi-Fi protocol., Three unit of Cortex M3 Base Board for Interfacing Sensors, A set of sensors for sensing of data and posting it to cloud. The set of sensors should be compatible with nodes and should be provided with proper connectivity options like base board where the sensors can be mounted. The sensors should be compatible with I2C, SPI protocols etc. The sensors should be pluggable. The base board should have 34 pin connector for I2C, SPI, UART, PWM lines available as well as a 10 pin connector for ADC interface with the node., 2KG stepper motor and +5V DC motor for demonstration of cloud based control using IoT application,  An IDE configured for IoT applications to be provided for entire lab., Workbook (Softcopy) Manual featuring basic examples to get started with the target board as well as examples to use internet and communicate with cloud, with detailed working procedures will be provided with the setup.,  The workbook contains examples related to interfacing of sensors as well as posting the data of the sensors on the cloud and take necessary action as required.

is pronounced as "eighty-eighty-five" microprocessor. It is an 8-bit microprocessor designed by Intel in using NMOS technology.

It has the following configuration −

• 8-bit data bus
• bit address bus, which can address upto 64KB
• A bit program counter
• A bit stack pointer
• Six 8-bit registers arranged in pairs: BC, DE, HL
• Requires +5V supply to operate at MHZ single phase clock

It is used in washing machines, microwave ovens, mobile phones, etc.

Microprocessor – Functional Units

consists of the following functional units −

Accumulator

It is an 8-bit register used to perform arithmetic, logical, I/O & LOAD/STORE operations. It is connected to internal data bus & ALU.

Arithmetic and logic unit

As the name suggests, it performs arithmetic and logical operations like Addition, Subtraction, AND, OR, etc. on 8-bit data.

General purpose register

There are 6 general purpose registers in processor, i.e. B, C, D, E, H & L. Each register can hold 8-bit data.

These registers can work in pair to hold bit data and their pairing combination is like B-C, D-E & H-L.

Program counter

It is a bit register used to store the memory address location of the next instruction to be executed. Microprocessor increments the program whenever an instruction is being executed, so that the program counter points to the memory address of the next instruction that is going to be executed.

Stack pointer

It is also a bit register works like stack, which is always incremented/decremented by 2 during push & pop operations.

Temporary register

It is an 8-bit register, which holds the temporary data of arithmetic and logical operations.

Flag register

It is an 8-bit register having five 1-bit flip-flops, which holds either 0 or 1 depending upon the result stored in the accumulator.

These are the set of 5 flip-flops −

• Sign (S)
• Zero (Z)
• Auxiliary Carry (AC)
• Parity (P)
• Carry (C)

Its bit position is shown in the following table −

Instruction register and decoder

It is an 8-bit register. When an instruction is fetched from memory then it is stored in the Instruction register. Instruction decoder decodes the information present in the Instruction register.

Timing and control unit

It provides timing and control signal to the microprocessor to perform operations. Following are the timing and control signals, which control external and internal circuits −

• Control Signals: READY, RD’, WR’, ALE
• Status Signals: S0, S1, IO/M’
• DMA Signals: HOLD, HLDA
• RESET Signals: RESET IN, RESET OUT

Interrupt control

As the name suggests it controls the interrupts during a process. When a microprocessor is executing a main program and whenever an interrupt occurs, the microprocessor shifts the control from the main program to process the incoming request. After the request is completed, the control goes back to the main program.

There are 5 interrupt signals in microprocessor: INTR, RST , RST , RST , TRAP.

Serial Input/output control

It controls the serial data communication by using these two instructions: SID (Serial input data) and SOD (Serial output data).

Address buffer and address-data buffer

The content stored in the stack pointer and program counter is loaded into the address buffer and address-data buffer to communicate with the CPU. The memory and I/O chips are connected to these buses; the CPU can exchange the desired data with the memory and I/O chips.

Address bus and data bus

Data bus carries the data to be stored. It is bidirectional, whereas address bus carries the location to where it should be stored and it is unidirectional. It is used to transfer the data & Address I/O devices.

Architecture

We have tried to depict the architecture of with this following image −