26.06.2019

IX 1.6.13 serial key or number

By admin IX 1.6.13 serial key or number 0 Comments

IX 1.6.13 serial key or number

Apple MacBook Air "Core i5" 13" (Edu Only) Specs

Identifiers: Mid/Edu Only** - MDLL/A* - MacBookAir4,2 - A -

All MacBook Air Models | All Models | Dynamically Compare This Mac to Others

Distribute This Page: Bookmark & Share | Download: PDF Manual

Quietly introduced without a press release, the MacBook Air "Core i5" 13" (Mid/Education Only) -- which only was available for sale to educational institutions in quantities of five or more -- is powered by a nm "Sandy Bridge" GHz Intel "Core i5" processor (M) with two independent processor "cores" on a single chip and a 3 MB shared level 3 cache.

It is configured with 2 GB of onboard MHz DDR3 SDRAM (which cannot be upgraded after purchase), 64 GB of flash storage, and an Intel HD Graphics graphics processor with MB of DDR3 SDRAM shared with system memory.

This all is packed in a razor thin ( inch), pound, aluminum case with an integrated "FaceTime" video camera, a backlit full-size keyboard and an " widescreen TFT LED backlit active-matrix "glossy" display (x native resolution).

Connectivity includes a/b/g/n Wi-Fi, Bluetooth , dual USB ports and analog audio out as well as an SDXC card slot and a "Thunderbolt" port that is backwards compatible with Mini DisplayPort and likewise supports an external display at x and passes an audio signal as well. Thunderbolt also supports other peripherals that use the Thunderbolt standard which provides up to 10 Gbps of bandwidth in both directions. It lacks internal Ethernet (an external USB adapter was offered as a US$29 upgrade) and lacks Firewire and optical audio in/out as well.

Compared to the "standard" MacBook Air "Core i5" 13" (Mid), this model is externally identical, but it has a slower processor, less memory (which, again, cannot be upgraded after purchase) and less storage as well. However, it is less expensive per unit, too.

Also see: What are all the differences between the education-only "Early " MacBook Air and the standard Inch "Mid" MacBook Air?

Buy This Mac at site sponsor OWC. Click for current options.

Buy This Mac (Business) at site sponsor Evertek. Bulk orders worldwide!

Upgrade This Mac at site sponsor OWC. SSDs, external storage & more.

Sell Newer Macs at A+ BBB rated site sponsor Cash For Your Mac. Quick quote!

Tech Specs
Ports
Global Original Prices
Popular Q&As

Click on a category for related details. The most commonly needed info is "open" by default, but all info is important. Asterisks (*) reference data in details fields.

Introduction Date:

February 10,

Discontinued Date:

June 11,

Details:

The "Introduction Date" typically refers to the date a model was introduced via press release, although no press release was issued for this model. The "Discontinued Date" refers to the date a model either was replaced by a subsequent system or production otherwise ended.

Also see: All Macs introduced in

Processors:

1 (2 Cores)

Architecture:

Bit

Geekbench 2 (32):

Geekbench 2 (64):

Details:

Geekbench 2 benchmarks are in bit and bit modes, respectively. These numbers reflect an average of user provided bit and bit results as submitted to the Geekbench website. Higher numbers are better.

You also might be interested in reviewing all bit and bit Geekbench 2 user submissions for Macs with the MacBookAir4,2 Model Identifier, which may include multiple models.

To dynamically compare Geekbench 2 results from different Macs side-by-side, see cromwellpsi.com's Ultimate Mac Comparison.

Geekbench 3 (32):

Details:

These Geekbench 3 benchmarks are in bit mode and are for a single processor core and all processor cores, respectively. Both numbers reflect an average of user provided results as submitted to the Geekbench website. Higher numbers are better.

You also might be interested in reviewing all bit single core and multicore Geekbench 3 user submissions for Macs with the MacBookAir4,2 Model Identifier, which may include multiple models.

To dynamically compare bit Geekbench 3 results from different Macs side-by-side, see cromwellpsi.com's Ultimate Mac Comparison.

Geekbench 3 (64):

Details:

Geekbench 4 (SC):

Geekbench 4 (MC):

Details:

These Geekbench 4 benchmarks are are for a single processor core and all processor cores, respectively. All Geekbench 4 benchmarks are bit. Both numbers reflect an average of user provided results as submitted to the Geekbench website. Higher numbers are better.

You also might be interested in reviewing all single core and multicore Geekbench 4 user submissions for Macs with the MacBookAir4,2 Model Identifier, which may include multiple models.

To dynamically compare Geekbench 4 results from different Macs side-by-side, see cromwellpsi.com's Ultimate Mac Comparison.

Geekbench 5 (SC):

Geekbench 5 (MC):

Details:

These Geekbench 5 benchmarks are are for a single processor core and all processor cores, respectively. All Geekbench 5 benchmarks for the Mac are bit. Both numbers reflect an average of user provided results as submitted to the Geekbench website. Higher numbers are better.

You also might be interested in reviewing all single core and multicore Geekbench 5 user submissions for Macs with the MacBookAir4,2 Model Identifier, which may include multiple models.

To dynamically compare Geekbench 5 results from different Macs side-by-side, see cromwellpsi.com's Ultimate Mac Comparison.

Processor Speed:

GHz

Processor Type:

Core i5 (IM)

Details:

This model is powered by a 32 nm, bit Intel Mobile Core i5 "Sandy Bridge" (IM) processor which includes two independent processor "cores" on a single silicon chip. Each core has a dedicated k level 2 cache, shares 3 MB of level 3 cache, and has an integrated memory controller (dual channel).

This system also supports "Turbo Boost " -- which "automatically increases the speed of the active cores" to improve performance when needed (up to GHz for this model) -- and "Hyper Threading" -- which allows the system to recognize four total "cores" or "threads" (two real and two virtual).

Turbo Boost:

GHz

Custom Speeds:

N/A

Processor Upgrade:

Soldered

FPU:

Integrated

System Bus Speed:

5 GT/s*

Cache Bus Speed:

GHz (Built-in)

Details:

*This system has a "Direct Media Interface" (DMI) that "connects between the processor and chipset" in lieu of a traditional system bus. Intel reports that it runs at 5 GT/s.

ROM/Firmware Type:

EFI

EFI Architecture:

Bit

L1 Cache:

32k/32k x2

L2/L3 Cache:

k x2, 3 MB (on chip)

Details:

Each core has its own dedicated k level 2 cache and the system has 3 MB of shared level 3 cache.

RAM Type:

DDR3 SDRAM*

Min. RAM Speed:

MHz

Details:

Shipped standard with 2 GB of MHz DDR3 SDRAM onboard.

Standard RAM:

2 GB

Maximum RAM:

2 GB*

Motherboard RAM:

2 GB*

RAM Slots:

None

Details:

*There are no RAM slots. 2 GB of RAM is soldered onboard and cannot be upgraded later.

Video Card:

HD Graphics

VRAM Type:

Integrated

Details:

This model has an Intel HD Graphics graphics processor that shares memory with the system.

Standard VRAM:

Maximum VRAM:

Details:

Apple reports that "memory available to Mac OS X may vary depending on graphics needs" and that the minimum graphics usage is MB for this model.

Built-in Display:

" Widescreen

Native Resolution:

Details:

" color widescreen TFT LED-backlit active-matrix "glossy" display with a by native resolution. Apple reports that it also supports " by , by , by , and by pixels at aspect ratio; by , by , and by pixels at aspect ratio; by pixels at aspect ratio".

In Germany, site sponsor Conodi provides high quality Mac and PC repair services as well as remote home office setup and troubleshooting. In-person and mail order repair services include the display, motherboard, water damage and more for this MacBook Air.

In Spain, site sponsor iRepairs provides affordable repair and data recovery services. In-person and by mail repair services include the display, battery, keyboard, motherboard, and more for this MacBook Air.

In Singapore, site sponsor Esmond Service Centre provides highly regarded repairs for the display, motherboard, battery, water damage issues, and more, all with a free estimate and fast turnaround for this MacBook Air.

2nd Display Support:

Dual/Mirroring

2nd Max. Resolution:

Details:

The maximum resolution supported on an external display is x

Standard Storage:

64 GB SSD

Std. Storage Speed:

N/A

Storage Dimensions:

Proprietary ( mm)

Storage Interface:

Mini SATA (6 Gb/s)

Details:

This model supports a single proprietary design SSD module with a Mini SATA (6 Gb/s) connector. It is mm thick.

Standard Optical:

None*

Standard Disk:

None

Details:

*MacBook Air models do not have an internal optical drive. Site sponsor Adorama offers the external Apple USB SuperDrive for US$ It writes DVD+R DL and DVD-R DL at 4X, DVD-R and DVD+R at 8X, DVD-RW at 6X, DVD+RW at 8X, reads DVD at 8X, writes CD-R at 24X, writes CD-RW at 16X, and reads CD at 24X.

Site sponsor Other World Computing also has a variety of compact external optical drive options that may be of interest, including some with Blu-ray capability.

Also see: What are the full capabilities of the external SuperDrive available for the MacBook Air? Can it be used with other Macs?

Standard Modem:

None

Standard Ethernet:

None*

Details:

*No MacBook Air models have an internal Ethernet port. However, an external Apple USB 10/Base-T Ethernet adapter was offered as a US$29 option.

Also see: What official and third-party adapters are available to connect the MacBook Air to wired Ethernet networks?

Standard AirPort:

a/b/g/n

Standard Bluetooth:

Details:

n (a/b/g capable as well) Wi-Fi and Bluetooth standard. Apple formerly referred to this wireless capability as AirPort Extreme.

Also see: What is n? How is it different from b, g, and a?

USB Ports:

2 ()

Firewire Ports:

None

Details:

Two Mbps USB ports, no Firewire ports.

Also see: What is a good USB hub to use with the MacBook Air while traveling?

Expansion Slots:

SD Card (SDXC)

Expansion Bays:

None

Details:

This model has an SDXC Card slot.

In the US (and many other countries), site sponsor Other World Computing sells a wide variety of external accessories, including docks, adapters, input devices, cases, and more for this MacBook Air.

In Australia, site sponsor Macfixit offers an extensive selection of external accessories like docks, stands, chargers, cases, security products, and more for this MacBook Air.

Also see: Which SD Card slot storage solution is best for the MacBook Air? Which models are compatible? Is this kind of storage safe?

Incl. Keyboard:

Full-size

Incl. Input:

Trackpad (Inertial)

Details:

Apple reports that the integrated keyboard has "78 (US) or 79 (ISO) keys, including 12 function keys, 4 arrow keys (inverted "T" arrangement)." Unlike earlier MacBook Air models, it is backlit.

For this MacBook Air, Apple did not formally mention the trackpad capabilities, but it is fully multi-touch capable.

Also see: What are the differences between the trackpads in different MacBook Air models?

Case Type:

Notebook

Form Factor:

MacBook Air 13"

Details:

This MacBook Air uses a razor thin aluminum case design with a "catchless" magnetic latch.

Apple Order No:

MDLL/A*

Apple Subfamily:

Mid/Edu Only**

Details:

*The individual order number is MDLL/A. BHLL/A refers to a "five pack" of these systems. BHLL/A refers to a ten pack and BHLL/A refers to a twenty pack including AirPort wireless networking and a mobile cart for transport and storage. Purchase was limited to educational institutions.

**Although this model was released in February , Apple officially refers to it as a "Mid" MacBook Air.

Apple Model No:

A (EMC )

Model ID:

MacBookAir4,2

Details:

Please note that these identifiers refer to more than one model.

Also see: All Macs with the A Model Number, the EMC Number, and the MacBookAir4,2 Model Identifier.

For more about these identifiers and how to locate them on each Mac, please refer to cromwellpsi.com's Mac Identification section.

Battery Type:

50 W h Li-Poly

Battery Life:

7 Hours

Details:

Apple reports that this model has a "built-in watt-hour lithium-polymer battery" and the company claims that it can provide up to 7 hours of "wireless web" use. Apple additionally notes that it provides "up to" 30 days of standby time.

Also see: What is the battery life of the "Mid" MacBook Air models in "real-world" usage tests? Do the faster custom-configured Core i7 models have inferior battery life than the standard models?

In the US (and many other countries), site sponsor Other World Computing sells quality batteries for this MacBook Air.

In the UK, site sponsor Flexx is a local distributor of OWC batteries for this MacBook Air.

In Australia, site sponsor Macfixit is a local distributor of OWC batteries for this MacBook Air.

Pre-Installed MacOS:

Maximum MacOS:

X x*

Details:

*This system fully supports the last version of OS X "Mountain Lion," OS X "Mavericks," and OS X "Yosemite" as well as OS X "El Capitan," but advanced feature support is limited to Mac-to-Mac AirDrop, AirPlay Mirroring, and Power Nap. Other major features are not supported. It is capable of running macOS Sierra () as well, although it does not support the Universal Clipboard, Auto Unlock, or Apple Pay features. Finally, this model is capable of running macOS High Sierra (), and it supports HEVC (High-Efficiency Video Coding), but it does not support hardware accelerated HEVC. It is not compatible with macOS Mojave () or later versions of the operating system.

Also see: Which Macs are compatible with macOS High Sierra ()? What are the system requirements? Which Macs support HEVC?

Minimum Windows:

7 (Bit)*

Maximum Windows:

(Bit)*

Details:

*Apple's Boot Camp 4 supports the bit version of Windows 7 on this model. Boot Camp 5 supports the bit version of Windows 7 and Windows 8. Earlier versions of Windows are not supported.

Although Apple does not support Windows 10 via Boot Camp 5 (officially or otherwise), this system meets Microsoft's hardware requirements and it very well may be possible to boot Windows 10 on this Mac. If you have installed Windows 10 on this system (successfully or unsuccessfully), please share the results of your experiment. Thank you.

MacOS 9 Support:

None

Windows Support:

Boot/Virtualization

Details:

Also see: Are there any third-party programs to run Mac OS 9/Classic applications on Intel Macs?

Site sponsor OHS specializes in heavily upgraded Macs capable of running both Mac OS X and Mac OS 9 applications.

For more on running Windows on Intel Macs, please refer to the exhaustive Windows on Mac Q&A.

Dimensions:

x x

Avg. Weight:

lbs ( kg)

Details:

In inches while closed - minimum height to maximum height by width by depth, ( cm cm, cm, cm).

Original Price (US):

US$*

Est. Current Retail:

US$US$

Details:

*This MacBook Air was available with 2 GB of RAM and 64 GB of flash storage and sold in packs of five for US$ (US$ each). Other packages were available as well, but purchase was limited exclusively to educational institutions.

Photo Credit: Apple, Inc.

Global original prices for the MacBook Air "Core i5" 13" (Edu Only) in 34 different countries and territories follow; organized alphabetically by region.

For global original prices for Intel Macs in one particular country on a single page, please refer to cromwellpsi.com's Global Original Prices section.

Original Prices - North & South America

Mexico:

N/A

United States:

US$*

Original Prices - Europe

Austria:

N/A

Belgium:

N/A

Denmark:

N/A

Finland:

N/A

Luxembourg:

N/A

Netherlands:

N/A

Norway:

N/A

Portugal:

N/A

Switzerland:

N/A

United Kingdom:

N/A

Original Prices - Asia

China:

N/A

Hong Kong:

N/A

India:

N/A

Indonesia:

N/A

Malaysia:

N/A

The Philippines:

N/A

Singapore:

N/A

Taiwan:

N/A

Thailand:

N/A

Vietnam:

N/A

Original Prices - Australia & New Zealand

Australia:

N/A

New Zealand:

N/A

If you have additional original prices for this model, please get in touch. Thank you.

Ten of the most popular Q&As about the MacBook Air models follow.

Permalink | E-mail a Friend | Bookmark & Share | Report an Error/Typo

Suggest an Addition | Sign Up for Bimonthly Site Update Notices

<< MacBook Air (Home) | Also see: MacBook Air FAQ

cromwellpsi.com is provided "as is" without warranty of any kind whatsoever. cromwellpsi.com, and the author thereof, shall not be held responsible or liable, under any circumstances, for any damages resulting from the use or inability to use the information within. For complete disclaimer and copyright information please read and understand the Terms of Use and the Privacy Policy before using cromwellpsi.com Use of any content or images without expressed permission is not allowed, although links to any page are welcomed and appreciated.

Источник: [cromwellpsi.com]

, IX 1.6.13 serial key or number

Download Teensyduino, Version

from wiring.h, allowing faster compile for most C++ code

precompile Arduino.h, allows some speedup of rebuild all

update core library, Wire, Audio, Bounce to use precompile Arduino.h

Reduce startup delay from ms to ms

fix teensy_serialmon asser of DTR on Windows, fixes (bool)Serial

(bool)Serial to use DTR only, fixes Serail remaining true after serial monitor close

fix truncated usbmodem names in Ports menu on Macintosh

Verbose info log now uses high res time on Windows 8 & 10

Verbose info log users 1ms res time on Windows XP & 7 (was 16 ms & 10 ms)

Fix Verbose info random order for same timestamp events - now always chronological

Add numbering of non-loader verbose logging instances

Trim excessive verbose logging of status communication

Updates to audio library documentation

Add Teensy Loader about dialog icon (was generic info icon)

Teensy now supports use of K RAM

EthernetClient fix for forced connection close

Small speedup to analogWrite for DAC pins

Fix DMAChannel transferSize() on Teensy LC

Fix FTM_CONF register bitfield defs

Update ADC library (Pedro Villanueva)

Audio: Add freeverb mono & stereo

Audio: Granular pitch shift & freeze effects (Bleep Labs)

Audio: envelope status functions

Audio: Fixes to waveform object

Audio: Add variable triangle waveform

Audio: Add modulated waveform, support for freq & phase modulation

Audio: Add simple amp/switch object

Audio: Add PDM input

PS2Keyboard: add UK & Spanish layouts

TimeAlarms: minor fixes

USBHost_t Joystick fixes (KurtE)

Macintosh build now uses 64 bits

Fix Teensy stack address (thanks Frank)

Better detection of Teensy model in Ports menu

Audio: fix WM input select

Improve multiple instance check in teensy_ports

Add -L option to teensy_ports (intended for PlatformIO)

Treat "narrowing conversion" as compiler warnings, not errors

Fix product ID for Flightsim+Joystick USB type

Audio: allow WAV files with extra/junk sections before "fmt" info

Ethernet: document cromwellpsi.com(cspin) in all examples

OctoWS Fix timing problem on Teensy

USBHost_t Fix clobbering of pipe config on endpoint size change

USBHost_t Improve enumeration of Multi-TT hubs

Handle attempt to reopen serial port, clicking button while Arduino compiles

Windows: teensy_serialmon detect orphaned from Arduino IDE condition

Avoid unnecessary delays when upload can't find any board

Print more informative messages about selecting board in Tools > Ports

Added ARM 64 bit experimental installer

Version

Add IntervalTimer update()

Ethernet fix socket receive state caching bug

Ethernet improve handling of unexpected remote server disconnect

SD fix timeouts

SPI pin changes kept in sync with AVR SPI emulation

SPI avoid interfere with pin 45

Wire force recovery from stuck slave devices

Wire improve detection of arbitration loss to other bus masters

Add AudioConnection disconnect() (thanks b0rg3rt)

Update cromwellpsi.com for compatibility with Arduino beta

Fix serial stall if higher than maximum baud rate configured

Improve delayMicroseconds on Teensy (Graham)

Fix SERIAL_8N2 mode on Teensy LC

Update sample Makefile

Add abort() function, needed for Pozyx library

Update keywords for Serial formats & USB Keyboard special keys

Improve AVR SPI register emulation, speed bits

Fix tone() issue when 0 Hz requested, minimum is 1 Hz

Fix Teensy LC DMAChannel bug (thanks kbob)

Audio add ADAT output (thanks Ernstjan Freriks)

Audio fix RMS analysis when no data

Audio ToneSweep improvements (thanks Pio)

Audio design tool custom name bug fixed (thanks neurofun)

Audio modulated sine amplitude when no mod signal fix (thanks neurofun)

Audio library documentation updated, several minor errors fixed

FastLED updated to support WSSerial

Time library minor updates & fixes

i2c_t3 library updated

OctoWS fix on Teensy

OctoWS remove unnecessary delay

OctoWS improve setPixel speed (thanks sgorsh)

USBHost_t36 support for CDC-ACM, PL & CH serial (thanks KurtE)

USBHost_t36 support for RawHID (thanks KurtE)

USBHost_t36 support for Xbox One controller (thanks KurtE)

USBHost_t36 improve keyboard & joystick support (thanks KurtE)

USBHost_t36 fix USB MIDI fast data input

USBHost_t36 Ant+ wireless adaptor support (adapted from Michael McElligott)

USBHost_t36 access to device ID and name (thanks KurtE)

XPT_Touchscreen detect touch by interrupts (thanks Donziboy2 & Defragster)

Accept String in Stream find() and findUntil()

Update LedDisplay library

USBHost_t36 Fix device status functions usage in polling loops

USBHost_t36 Clean up bandwidth usage info when deleting a pipe

USB MIDI support for virtual cables (select from Tools > USB Type menu)

USB MIDI updated with most functions of Arduino MIDI lib

USB MIDI getType() now returns same as MIDI -- NOT BACKWARDS COMPATIBLE

Support for compatibility with Arduino's MIDIUSB.h

Added more examples in File > Examples > Teensy > USB_MIDI

USBHost_t36 MIDI support for virtual cables

USBHost_t36 MIDI updated with most functions of Arduino MIDI lib

USBHost_t36 MIDI returns same as MIDI -- NOT BACKWARDS COMPATIBLE

USBHost_t36 MIDI fix for devices using interrupt endpoints

USBHost_t36 MIDI workaround for devices sending improperly coded sysex message

XPT_Touchscreen add setRotation()

FreqMeasureMulti fixed on Teensy LC (thanks Manitou)

USB MIDI & USBHost_t36 MIDI pitch bend using signed integer -- NOT BACKWARDS COMPATIBLE

USB MIDI & USBHost_t36 Fix receiving some MIDI sysex messages

USB MIDI add Interface_3x3 example

USBHost_t36 fix MIDI getType for note off messages

USBHost_t36 add MIDI Interface_16x16 example

Adafruit_SSD uses kHz in I2C mode

USBHost_t36 Joystick improvements, More Axis, Rumble, LEDs (KurtE)

Libs updated: FastLED, Adafruit_NeoPixel, Adafruit_GFX

Libs removed: NewPing

Add USB MIDI Many_Knobs_Buttons example (oddson)

Version

Support for Arduino

USBHost_t HID parsing, improved Mouse driver, new Joystick driver, hub driver fixes, idVendor() & idProduct() functions, keyboard improvements (Kurt)

Audio: fix stereo DAC right channel bug, fix DAC clipping overflow issue, fix FFT with LTO optimize (Frank)

Updated: Snooze, FastCRC, i2c_t3, TinyGPS, TeensyThreads

Fix systick hang when yield() overridden

Show warning for certain counterfeit boards, but still allow upload

Linux Teensy Loader now uses udev to find USB devices

Fix delay when uploading on Linux

Fix missing upload error messages in newer Arduino

Fix race condition causing "Teensy Loader is unable to read your compiled sketch (r)"

Version

Fix IntervalTimer compile error on Teensy LC

Use gnu++11 on Teensy (was c++11)

Stream find functions now take const pointers on Teensy

Update Print class for Teensy

Don't redefined BYTE (for ancient Arduino compatibility) if already defined

Add pgmspace.h (no avr prefix) for ESP compatibility

Support AVR pgm_read_ptr() on Teensy LC & 3.x

Fix srandom conflict

Updated libs: Adafruit_NeoPixel, openGLCD, Snooze, TFT_ILIC

Fix compiler warnings & improved error messages: EEPROM, Adafruit_CC, Adafruit_GFX, Adafruit_ILI, Adafruit_ILI, Adafruit_RA, ADC, FastCRC, FrequencyTimer2, i2c_t3, ILI_t3, IRremote, Keypad, ks, LowPower, OctoWS, OneWire, openGLCD, OSC, PulsePosition, RA, SerialFlash, SoftPWM, ssd, ST, Talkie, Time, TimerOne, TinyGPS, Tlc, x10

Raspberry Pi builds with jessie (previous builds were on wheezy)

Version

Support for Arduino

Use C++14 on 32 bit Teensy boards

Fix Wire lib with fastest optimize and > MHz CPU speed

Wire emulate AVR twi_writeTo - for Adafruit compatibility

Wire1 support pins on Teensy & SD socket (if not using SD card)

Fix install problem on Arduino

Fix analogReadAveraging with ADC1

Allow more memory for audio library on Teensy &

Fix audio library delay effect on Teensy &

Audio I2S uses 64 bit frame, improve compatibility with I2S mics

Fix OctoWS seldom-used color conversion options

Add pure code choices in Tools > Optimization

USBHost_t36 improved handling of error & pipe stall

fix for disable of SD on Teensy & (Frank)

cromwellpsi.comer(readbuf, writebuf, size) (KurtE)

Added TeensyThreads library (Fernando Trias)

Fixed Adafruit_CC on Teensy 3.x

Audio envelope graceful handling of noteOn while gain > 0

Improved FreqMeasureMulti countToNanoseconds

[Experimental] EventResponder

[Experimental] MillisTimer

[Experimental] SPI async using DMA & EventResponder (KurtE)

Remove second wait in cromwellpsi.com

USBHost_t36 mouser driver (wwatson)

Update Adafruit_CC, AccelStepper, Adafruit_GFX, Adafruit_SSD, FastLED, IRremote, Keypad, MFRC, SoftPWM, SPIFlash

Symbol table and disassembly listing are placed in temp build folder

Fix audio memory usage stats when more than blocks allocated

Fix USB audio transmit with null data

Audio library support for external delay with CY15B (FrankB)

Version

Support for Arduino

Drop Arduino & support

Fix SD library larger than 64K read/write

SPI lib - unified SPIClass, constexpr

Wire lib - constexpr

Use gnu++11 for 32 bit Teensy

MTP fixes

add MTP Disk to USB Type menu

Print, Stream, Serial, Serial# use constexpr

analogWriteResolution returns prior setting

add missing kinetis.h register defines

availableForWrite & flush in Print class

map() improvements - now works with float & double

fix exp10 and stricmp

Audio: improved envelope, added TDM, Waveshaper, PWM Synth, CS, fix I2S slave

FastLED fixes

Update MIDI to latest version

Fix PS2Keyboard

Tlc fixes

XPT_Touchscreen interrupt fix on non-Teensy boards

Fix auto-reboot on Windows 10 rev (Creator's Update)

Fix FastLED with OctoWS on Teensy

Improve min() max() for C++ compatibility (tni)

Fix analogWrite to DAC with LTO (tni)

Fix DMAChannel repeated transferCount (KurtE)

Fix DMAChannel alignment on Teensy LC (tni)

Fixes to OctoWS, solve "first pixel" issue on Teensy

Fix SPI SCK (pin 13) drive strength (KurtE)

Increase USB cromwellpsi.com() wait for serial monitor

Fix Audio SD WAV play status with LTO optimization

Teensy Loader window movable by clicking in center area

Support "Clear output" button in Arduino serial monitor

Version

Support for Arduino

Update ARM toolchain to gcc

Add more optimization choices (including LTO) to Tools > Optimize

Ethernet socketBeginMulticast (manitou)

Fix IntervalTimer on Teensy

Wire library supports Wire1, Wire2

Wire library timeouts for error conditions

Libraries updated: AccelStepper, ADC, Audio, FastLED, LedDisplay, RadioHead, ShiftPWM, Snooze, SPI, TouchScreen, Wire

Libraries added: USBHost_t36

Minor improvements to AVR emulation

Hardware serial write() compatibility fix

Fix pin config on Serial6

Add extreme joystick, disabled by default, edit usb_desc.h

Fix String test as boolean

Faster installation, especially on Mac

Optimize cromwellpsi.comer(buffer, length) (KurtE)

Fix USB audio on Macs & improve PassThroughUSB example

Start USB sooner

Add volume() function to AudioInputUSB

Fix rare memcpy issue (Frank B)

Fix 9 bit mode on Serial1 & Serial2 on Teensy LC (gecko)

Fix to dtostrf for small numbers (LAtimes2)

cromwellpsi.com() waits up to 1 second for serial monitor open

analogWriteFrequency minimum on Teensy LC

Fixes in ADC library (KurtE)

Fixes in RadioHead library (KurtE)

Version

Support for Arduino

Improve buildin SD card startup on Teensy & after uploading

Fix SD card clock speed on Teensy &

Fixes to Serial5 and Serial6 on Teensy &

Fix string length check on readString() and readStringUntil()

Libraries update: Audio, FlexCAN, OctoWS,

Fix compiler warnings in USB Disk with Teensy

Version

Support for Arduino

Add Tools > Optimize menu, add "Faster" (-O2)

Fix driver install/update on Windows 7 & 8

Prevent "might not have installed correctly" message on Windows

Fix Teensy Loader "Illegal Instruction" on Windows 10 restart

Anti-alias font fix for Arduino on Windows

Fixes for compiler warnings

Libraries updated: Adafruit_RA, Adafruit_ST, Adafruit_STMPE, Artnet, Bounce2, FastCRC, FlexCAN, NewPing, OSC, ShiftPWM, UTFT

Version

Fix first-use communication error between Arduino & Teensy Loader

Teensy Loader Verbose Info now logs time with milliseconds

More logging in (tempdir)/teensy_reboot_cromwellpsi.com

Teensy Loader GUI toolkit updated (now using wxWidgets )

Mac version now requires OSX (Lion) or later

Libraries updated: Audio, Tlc, SPIFlash

Version

Add support for Arduino

Serial monitor shows status in title bar, Arduino only

Ethernet library now supports W chip

Fix SD library with old SD cards on Teensy &

Fix IntervalTimer start/stop bug

Fix Audio library SPI hogging with Teensy / build in SD card (Frank B)

Libraries updated: Snooze, Time, TimerThree, Audio, UTFT

Libraries added: EasyTransfer, ResponsiveAnalogRead

Improved sync between Arduino IDE and Teensy Loader

Arduino IDE Tools > Ports menu labels ports as "Teensy"

Fix Arduino Verify starting upload when Teensy already in bootloader mode

Teensy Loader wrong chip dialog is now nonblocking.

pinMode supports INPUT_DISABLE on 32 bit Teensy boards

attachInterrupt supports uninitialized pins

Serial RTS watermarks scale with buffer size (Frank B)

Optimized Adafruit_ST improved & renamed to ST_t3

Ethernet library optimizations & cromwellpsi.com(CS_PIN)

Improve audio library usage with smaller block sizes

Version

Add support for Arduino

Arduino SD library support 4 bit SDIO on Teensy & (special thanks WMXZ)

Fix EEPROM on Teensy with CPU speed > MHz (special thanks Defragster)

Update FlexCAN library for CAN1 on Teensy (Pawelsky)

Update OctoWS to support Teensy &

Fix USB serial number on Teensy with CPU speed > MHz

Fix audio I2S output on Teensy with CPU speed > MHz when also using I2S input

Support Teensy & on older versons of Arduino

Fix SPI1 default SCK1 pin (KurtE)

Optimize attachInterrupt (tni)

Improve USB stability on Teensy with CPU or MHz

Add USB MIDI custom name example

Fix Adafruit_ST on Teensy & (MichaelMeissner)

Many library metadata files updated for PlatformIO

Fix Ethernet library socket receive bug (thanks ElOtroMateo)

Fix compiler warnings, eg: kinetis_hsrun_enable unused

Serial buffer sizes override from command line (Frank B)

Stream find functions use const for pointers

Add AudioOutputAnalogStereo and AudioInputAnalogStereo

Add Audio reverb effect (Joao Rossi Filho)

Add Audio waterfall spectrum example (Nathaniel Quillin)

Fix USB Audio on Windows when used with USB Serial

Fix auto-reboot for newer USB types

Fix serial monitor for newer non-serial USB types

Many ILI_t3 improvements (Frank B, Kurt E, Softegg)

SerialFlash allows other SPI ports (Martino Facchin)

Teensy Loader shows correct images for Teensy &

Improved handling of float INF & NAN (Frank B)

Bundle libpng12 & libusb10 libraries, missing from some Linux distros.

Version

Add support for Arduino and

Add support for Teensy and (still beta)

Improve USB audio - optional Mac workaround

Libraries updated: Audio, OctoWS, ADC, i2c_t3, IRremote, SPI, FastLED

Optimize analogRead

Version

Add support for Arduino

Add support for running on Raspberry Pi (Linux ARM)

Drop support for Arduino and

USB Keyboard improved media keys, now Windows compatible

Add USB Touchscreen (up to 10 fingers)

Add USB Audio

USB Mouse adds horizontal scroll

More combinations in Tools > USB Type

cromwellpsi.com() adds open drain option

Libraries updated: Audio, FastCRC, FreqMeasureMulti, PS2Keyboard, SerialFlash, FreqCount, LedDisplay, SerialFlash, Talkie, TFT_ILIC, FastLED, ADC, TimeAlarms, TimerOne, TimerThree

SPI setMOSI, setMISO, setCLK work after cromwellpsi.com

Serial1 setTX, setRX support pins 24 & 25 on Teensy LC

Port cromwellpsi.com to Teensy3 (thanks KurtE)

Port digitalWriteFast & digitalReadFast to Teensy2 (thanks KurtE)

Port Arduino's AVR Serial1 optimization to Teensy2 (thanks KurtE)

Add missing hardware register defs (thanks Duff)

Fix undocumented flightsim callback (thanks jbliesener)

Fix Servo library compile issue on Arduino

Fix WCharacter and ctype functions

Allow SPI setMOSI, setMISO, setCLK after cromwellpsi.com()

Document flash security lock in mk20dxc

Support more F_BUS overclock speeds

Fix pulseIn on Teensy LC (thanks KurtE)

Version

Support for Arduino

Ethernet library rewrite & performance improvement

Serial1, Serial2, Serial3 setTX(pin) setRX(pin)

Wire setSDA(pin) & setSCL(pin) & end()

pinMode INPUT_PULLDOWN, OUTPUT_OPENDRAIN (thanks Xenoamor)

USB Mouse supports MOUSE_BACK & MOUSE_FORWARD buttons (thanks Xenoamor)

cromwellpsi.comnterrupt supports IntervalTimer

Add libraries: MFRC, Bounce2, RA

Update LiquidCrystal, Adafruit_GFX, Adafruit_NeoPixel, AltSoftSerial, Audio, CapacitiveSensor, DSRTC, Encoder, i2c_t3, ILI_t3, OctoWS, OneWire, SerialFlash, ShiftPWM, Snooze, TFT_ILIC, Time, TimerOne, TimerThree, Adafruit_SSD, ADC, OctoWS

Added CMP register defs (thanks Duff)

Convert all built-in library from "legacy" format

Fix serial monitor transmit in non-Serial modes

Fix small error in IntervalTimer floating point init

Fix momentary wrong board display in Teensy Loader during "Reboot OK"

Fix back button in installer when an error is detected (easier to retry)

Remove ARDUINO_ARCH_AVR from non-AVR Teensy boards

Add IPAddress fromString()

Fix E2END to always represent actual EEPROM size

Fix cromwellpsi.com() to disable alternate pins, if used

Installer name changed from "teensyduino" to "TeensyduinoInstall" (runs as admin on Windows)

Version

Add support for Arduino

Updates to Ethernet, Wire and XPT_Touchscreen libraries.

Add Note Frequency detection to Audio (thanks Colin Duffy)

Fix attachRTS on Serial2 & Serial3 on Teensy 3.x

Add RA library, optimized for Teensy 3.x (thanks Sumotoy)

Other minor fixes and improvements

Version

Add support for Arduino

Fix USB Serial on Macintosh El Capitan

Partially fix Mac signatures (still must run Arduino once before installing)

AnalogWriteFrequency supports extremely low speeds (thanks Theremingenieur)

Improve tone() changing frequency while running

cromwellpsi.comRts() and cromwellpsi.comCts()

Update libraries: AltSoftSerial, FastLED, ILI_t3

Add XPT_Touchscreen library

Improve Ethernet library W reset handling

Update SD library examples

Add I2S 2-port register bitfield names

Initial work on MTP Disk (incomplete)

Version

Add support for Arduino r5

Detect Windows 10 serial driver during install, avoid adding Teensy's INF.
If you installed a previous version on Windows 10, you can remove Teensy's unneeded serial driver.

Drop support for Arduino , due to this bug

Update Adafruit_GFX, FastLED, ILI_t3 (added fonts)

Audio lib: play from SerialFlash (thanks Wyatt Olson), ext mem delay, bitchusher (thanks Pensive)

Floating point constants are now single precision on Teensy LC, ,

SD root dir bug and other minor fixes

SD Teensy3 optimized (not enabled by default) has improved caching

Servo library easier to edit for more than 16 motors

Remove dedicated AVR toolchain (was only needed for Arduino )

Avoid interfering with new Arduino color scheme

Serial flow control functions (C only for now)

XPlaneRefs with names >58 chars (thanks jbliesener)

USB MIDI Time code (thanks Karg)

Installer detects Windows 10, skips driver install

Installer looks in more places on Windows to auto-find Arduino

Version

Support for Arduino

Optimize cromwellpsi.com() and micros() on Teensy-LC

Update Snooze, ADC and i2c_t3 libraries

Several very minor bug fixes

Version

Support for Arduino

Improve Wire library, handle Lidar Lite issues

Add SerialFlash library

Optimize SD library for Teensy 3.x (SD_t3.h, disabled by default)

Default Systick interrupt to priority level 32

Fix 24 MHz speed on Teensy

Fix RawHID on Teensy with newer Arduino version

Update Time library

Update i2c_t3 library, adds support for Teensy-LC

Update OSC library

analogWriteFrequency() now allow precise sub-1 Hz input

Fix SPI FIFO bug in ILI_t3

Fix delay() and micros() bug at startup on Teensy-LC

Version

Support Arduino and

Update EEPROM and OneWire libraries

Add ADC and i2c_t3 libraries

Fix USB flightsim on Teensy-LC

Fix cromwellpsi.comer16 & support SPI1 on Teensy-LC

Fix String(unsigned char) on Teensy

Add cromwellpsi.combleForWrite() on Teensy

Fix printing of long integers on Teensy

Improve USBtoSerial example

Fix harmless but annoying compiler warnings

Version

Support for Teensy-LC

Support Arduino and

Keep Arduino Serial Monitor window open during Upload (Arduino , , )

Improve Arduino Serial Monitor efficiency & memory usage (Arduino )

cromwellpsi.comck()

Tools > CPU Speed menu supports speed vs size optimized (Teensy & LC)

Update sample Makefile for non-Arduino usage

Simplify usb_desc.h for creating custom USB devices

Libraries added: Adafruit_VS, FastCRC, openGLCD, Snooze, TFT_ILIC

Libraries updated: Adafruit_CC, Adafruit_NeoPixel, Adafruit_SSD, Adafruit_ST, FastLED, FreqCount, FreqMeasure, ILI_t3, IRremote, MsTimer2, OctoWS, OneWire, PS2Keyboard, PulsePosition, Time, TimerOne, TimerThree, TinyGPS

Upgrade ARM Toolchain from to

Various minor bug fixes

Version

Support Arduino

Add libraries: Audio, FlexCAN, Adafruit_CC, SPIFlash, RadioHead, FastLED, Adafruit_ILI, ILI_t3, Artnet

Update libraries: Adafruit_NeoPixel, OctoWS, Time, Adafruit_SSD, Adafruit_ST, ShiftPWM

Libraries ported to Teensy 3.x: AltSoftSerial, CapacitiveSensor, FlexiTimer2, FreqCount, FreqMeasure, FrequencyTimer2, MsTimer2, ShiftPWM, TimerOne, TimerThree, Tlc

Libraries ported to use SPI transactions: SD, Ethernet, Adafruit_CC, Adafruit_ILI, Adafruit_STMPE, RadioHead

Add SPI Transactions

Add DMAChannel & DMASetting objects

Add serialEvent (usb serial) & serialEvent# (hardware serial)

Add cromwellpsi.combleForWrite() & Serial#.availableForWrite()

Use Serial2 FIFO on Teensy

Add transmitterEnable() on Serial2 & Serial3

Fix analogWriteFrequency on Teensy pins 25 & 32

Add Installer Directory Help Button

Fix strncpy_P on Teensy 3.x

Add Czech keyboard layout to menu

Add yield() function on Teensy

Add IntervalTimer priority()

Don't mix CPU speed setting switching from Teensy to 3.x

Add FASTRUN, for functions in RAM on Teensy 3.x

Interrupt vector table moved to RAM for Teensy 3.x

Add attachInterruptVector()

Optimize Teensy 3.x hardware register definitions

Serial port names added to pins_arduino.h

Fix ARM toolchain linker & zlib issue (thanks to Andrew Kroll)

Add AVR emulation for util/parity.h

Version

Add support for 72 MHz on Teensy

Fix relative positioning on Teensy 3.x USB mouse (now has hybrid relative+absolute)

Add more AVR emulation on Teensy 3.x: wdt.h, crch, sleep.h, EMISK

Fix USB Serial break on Teensy3 (needed by some Labview applications)

Fix USB endpoint read with no data (thanks nox)

Add USB MIDI SysEx callback (thanks pcbeard)

Workaround for auto-reboot problems on Teensy when using watchdog

Fix initialization of local static vars from non-const data on Teensy 3.x

Make all Teensy HardwareSerial functions virtual (fixes issue with pointers to objects)

Add extra zero to USB serial number, works around a Macintosh CDC driver bug
If previous versions have been used, Windows will detect a "new" device, "install" the driver again, and assign a new COM port number.

Add Kinetis register definitions: DMA bits, VREF bit, ADC PGA, DMA priority registers

Fix IRQ_PRIORITY hard-coding in Serial3

Fix lockup in AVR emulation of cromwellpsi.comaMode(SPI_MODE0)

Fix lockup in AVR emulation of TWBR when running at 24 MHz

Fix rare lockup in repeated cromwellpsi.com() on Teensy

Update DS library with workaround Arduino Due names.

Update Entropy library, now fully compatible with Teensy 3.x.

Add Teensy slow clock options, 2, 4, 8 & 16 MHz thanks for all the help Duff

Add overclocking code (not enabled by default) for Teensy 3.x at , & MHz

Minor Makefile improvement (Matthias Lohr)

Aesthetic source code cleanup

Drop Teensy support

Version

Fix compile errors in several Arduino libraries with Teensy

Fix OctoWS on Teensy

Keep unused native SPI chip selects high (disabled), Teensy &

Speed up SD library

Fix upload > k on Teensy

Update Windows driver, fix Serial+Keyboard on Windows 8

Fix __cxa_guard errors on Teensy

Add missing DMA & PGA & other register definitions for Teensy

Add cromwellpsi.comitterEnable(pin) for RS applications

Fix startup issue impacting Neopixel library on Teensy

Fix analogRead(39) (V ref) on Teensy

Improve Teensy3 early startup hook, thanks to Anbroz Bizjak

Fix Arduino IDE library conflicts, Adafruit_GFX vs Robot libs

Mouse wheel support for scrolling long menus in Arduino IDE on Windows & Linux

Teensyduino version can be seen in Arduino's Help > About screen

Version

Support for Teensy

Ethernet library support for W chip

Print speedup for Teensy2

analogRead is now thread safe on Teensy3

Keep USB & serial working in Teensy3 fault condition

Support interrupt priority levels on Teensy3

Serial1 on Teensy3 to transmit even if interrupt blocked

Fix Teensy3 USB buffer memory leak with re-enumeration

USB Mouse on Teensy3 now uses absolute cursor positioning,

cromwellpsi.com(x, y) and cromwellpsi.comSize(width, height)

USB Keyboard on Teensy3 supports media keys (Mac & Linux only)

Add missing AVR string _P functions on Teensy3

Add missing AVR eeprom functions on Teensy3

Improve Serial1, Serial2, Serial3 buffer size configuration on Teensy3

Fix to Teensy3 Makefile

USB MIDI example improved

Stream printf, eg: cromwellpsi.com()

Add missing new/delete

Add digitalPinToInterrupt

Added SPIFIFO for Teensy3

Ethernet library speedup (using SPIFIFO)

Hardware serial support for other data formats, 7E1, 8N2, etc

9 bit serial format (not enabled by default)

Czech keyboard layout (not enabled by default)

Fix cromwellpsi.comeAll() on Teensy3

Fix USB MIDI setHandlePitchChange on Teensy2

Fix arm math lib warnings

Fix digital signatures for Windows exe files

Removed ancient Arduino support

Windows USB Serial driver signature (should now install on Windows 8 without reboot)

Windows Installer signature

Windows Installer tries to find Arduino and automatically select its location

Version

SPI library can assign alternate Teensy3 pins: setMOSI, setMISO, setSCK.

Reduce Teensy power consumption while not uploading.

Improve Teensy upload on Macintosh.

Avoid erasing EEPROM during Teensy upload.

Version

Fixed Serial2 and Serial3 regression on Teensy

Fixed USB MIDI sendProgramChange on Teensy

Add ARM math library for Teensy

Teensy Loader now recognizes ARM elf format, will not accidentally program Teensy code to a pre board.

Teensy Loader version number is now in sync with Teensyduino version.

Fix stall when connected to a Raspberry Pi that reboots

Add float number support to String

Add String remove()

String now formats unsigned char as a number, same as Print.

Add AVR pin number constants

Added open source license to Teensy3 core library files

Updated Firmata library

Fix USB product name customization header

Reduce USB memory usage

Emulate AVR's TWBR register on Teensy

Fix single-quote key for USB Keyboard on German and French Canadian layouts

Version

Updated Time library. "atime_t" on Teensy changed back to "time_t". Date strings fixed on Teensy NTP and GPS sync examples updated for Arduino Many other fixes and improvements to the Time library examples.

Added DSRTC and TimeAlarms libraries (companions to Time library).

Linux select-paste supported (Arduino and later, Linux only)

Added "Copy To Clipboard" button for compile errors (Arduino and later)

Turkish keyboard layout special keys supported for USB keyboard.

Fixed Ethernet DNS client bug on Teensy

KEY_MENU name added for the menu key.

Memory tuning parameters (heap_start, heap_end, malloc_margin) supported on Teensy

Fix compile error on Teensy with ps2dev library.

Fix F() macro "const" when used with newer versions of avr-gcc.

Added DDR registers and pullup resistors to AVR port register emulation on Teensy

Optimized cromwellpsi.com(buffer, length) on Teensy

Added IntervalTimer to Teensy - Thanks to Daniel Gilbert

Added compiler defines to example makefile, for compatibility with Arduino libraries

Added cxa_guard_acquire / cxa_guard_release needed for some Ethernet library applications

Fixed brief glitch at the beginning of analogWrite()

Round analogWriteFrequency() to the nearest possible frequency

Fix micros() bug on Teensy when read while interrupts disabled.

Fix IPaddress Printable usage on Teensy

Fix Serial1 on Teensy when more than 8 bytes written with interrupts disabled.

Optimize Serial1 FIFO handling on Teensy , for dramatically less CPU time per byte.

Convert tone() on Teensy to use IntervalTimer.

Use serial number for all USB types on Teensy

Remove MIDI message names which conflict with MIDI library.

Allow override of USB manufacturer, product and serial strings on Teensy See usb_names.h.

Add makeWord() to Teensy

Fix buffer overflow in String + long integer concatenation on Teensy

Update AccelStepper library.

Update Encoder library - now supports interrupts on all Teensy pins.

Update PS2Keyboard library - French keymap, readUnicode() function, Teensy interrupt support.

Update TinyGPS library

Support for Arduino

Optimize cromwellpsi.comtes(), both Teensy and

Optimize cromwellpsi.comble() on Teensy

Added IntervalTimer destructor.

Added String c_str() function.

Removed ArdOSC library.

DmxSimple library support for Teensy and (previously only Teensy++ worked)

Fixed FastSPI compile problem on Teensy and Teensy++

Update MIDI library to version

Fixed error highlighting when using Teensy

Improved recompile speed when Arduino is installed in a location with space in the pathname.

Improved automatic initialization of the Teensy RTC, when a kHz crystal is present.

Fix SD + Ethernet library compatibility on Teensy

All 4 IntervalTimer objects usable on Teensy

Fix off-by-one bug in delay() on Teensy

Enable I/O after wakeup from lowest power stop mode on Teensy

Fix analogInputToDigitalPin() on Teensy++

Added OSC (Open Sound Control) library

Updated VirtualWire library to and support Teensy

Updated SoftPWM library to and support Teensy

Updated XBee library to

Added partial SoftwareSerial for Teensy If the pins match one of the real serial ports, hardware serial is used. This allows use of libraries that are hard-coded for SoftwareSerial. If non-serial pins are specified, only transmit works. Software-based receive is not yet supported (but planned for a future release)

Version

Support for Arduino

Fix cromwellpsi.com(0)

Turkish keyboard layout (Teensy )

Fix while(!Serial)

Fixes for ST library (Teensy )

Add OctoWS library

Update libraries: Keypad, Metro, OneWire, Ping, ST

Version

Support for Teensy

Version

Support for Arduino

Fix French keyboard layout

Version

Support for Arduino

Fix error message line number bug.

Add Teensy files (arm-none-eabi toolchain is not yet in the installer, use this copy for Teensy ).

Version

Support for Arduino

cromwellpsi.com() & cromwellpsi.come(), for compatibility with Leonardo sketches

Add descriptions for most included libraries.

Fix USB Mouse Buttons example.

Version

Support for Arduino rc2

Add Flight Sim Controls USB Type

Add function keys F13 to F24 to USB Keyboard

Add Canadian Multilingual keyboard layout

Add libraries AccelStepper, AltSoftSerial, Encoder, FlexiTimer2, LowPower, Ping, ShiftPWM

Minor fixes and changes for compatibility with libraries

Version

Serial + Keyboard + Mouse + Joystick type

Raw HID available() function

Fix Ethernet library UDP support on &

Windows installer: faster detection of serial driver already installed

Version

Support for Arduino

German Mac keyboard layout

(experimental) Raw HID USB type

Version

Add media keys. See File > Examples > Teensy > USB_Keyboard > MediaButtons

Improve elapsedMillis & elapsedMicros.

Fix small delayMicroseconds at 1 & 2 MHz clock.

Version

Add elapsedMillis & elapsedMicros.

Fix slight timekeeping error in millis().

Fix errors with avr-gcc on Fedora 15 (thanks to Ward Wouts).

Version

Support Arduino

More minor fixes in Print

MIDI improvements, thanks to Sebastian Tomczak & Dave Sorlien

Version

Minor fixes in Print

Support CapacitiveSensor library

Version

Support Arduino rc2

Fix pulseIn

Fix printing negative floats

Improve Disk claim/release, add pause/resume API

Add compatibility functions for Leonardo Mouse API

Improve serial emulation on Linux

Version

Fix obscure bug in pinMode

Fix slow memory leak on Linux

Version

Support Arduino rc1

Add more keyboard mappings

Add pushbutton examples using Bounce library

Version

Fix Ethernet on beta4

Fix slow startup of serial monitor in Mac

Fix compile speedups for Mac and Windows

Version

Support Arduino beta4, drop old &

Fix stall of compile/upload when auto-launching Teensy Loader

Many small fixes

Version

USB Joystick type

Improved keyword coloring

(not working yet) cromwellpsi.com() to allow using SD library with USB Disk type

Serial using Stream class

MIDI library included

Try to avoid stalling millis() with USB Disk and heavy PC access

Several minor bug fixes

Version

Installs 3rd Party Arduino Libraries

Installs Teensy Loader

More Examples, in File > Examples > Teensy

Version

Support for Arduino version

USB MIDI type added

International USB Keyboard layouts

String class bug fixes

Rework cromwellpsi.com menu syntax (requested by Arduino devs, issue #)

Fixed Ethernet with &

Version

Support for Arduino versions and

USB Disk type added, supporting both SD Flash and internal flash

Fix Arduino bugs #29, #78, #, #

Emulate Arduino reboot behavior with Serial Monitor window is opened

Windows - directory drop-down now says "[all drives]", instead of just blank space

Compatibility with , String class, improved delay(), stream class, shiftIn()

Compatibility with , Tone() and noTone()

USB Serial: ignore break signal (some buggy programs send it, eg winbatch)

Windows - Teensyduino installer now included Serial driver install

USB Type and CPU Speed menus added inside Tools menu

Version B

Fix rare digitalWrite and digitalRead interference bug

Add A0, A1, A for analogRead(A0) - Arduino compatibility

Version

Add support for Teensy++

Add support for Arduino

Fix ethernet library

Add cromwellpsi.com() - shuts off and disconnects USB, saves power!

Automatically shut down USB when possible

cromwellpsi.com() attempts to wait until PC/Mac has initialized USB

Add cromwellpsi.com()

Remove Teensy_Firmata - StandardFirmata branch now supports Teensy

Optimize most functions

Minor bug fixes

Version

Better error checking when installing files

Do not require rxtx lib on linux, which is removed on 64 bit systems

Fix USB Keyboard/Mouse on Teensy

Support 8, 4, 2, 1 MHz if specified in cromwellpsi.com

Use ADC in high speed mode, makes analogRead() twice as fast

Use lower power idle mode inside delay()

Minor bugs fixed

Version

Add Keyboard and Mouse board types

Add support for Teensy (ATMEGA32U4 chip)

Add support for

Version

Add Firmata example

Add USB serial extensions to Serial

Add support for

Fix cromwellpsi.comble()

Fix HardwareSerial()

Check Arduino version, do not install onto wrong version!

Version

Library fixes included, compatible with Sanguino

Add support for

Update core with improvements and bug fixes from to

Many small improvements

Version

Version adds support for the Teensy++.

Pin names are now defined automatically. PIN_B0, PIN_C7, etc.

Add support for ( on linux because was never released on linux).

Version

Change API to use cromwellpsi.com to talk to USB.

Fix pinout

Many bugs fixed

Version

Initial release

Known Issues

Windows: Windows Defender and many anti-virus programs can dramatically slow down code compilation. A modern PC should take less than 10 seconds to verify simple programs. If Arduino takes 1 minute or longer to verify simple programs, that is a sure sign anti-virus software is slowing you down.

TODO: Wanted screenshot(s) for Windows Defender config to exclude real time scanning Arduino

Macintosh: Teensyduino requires access to your Documents folder, because Arduino stores installed libraries and boards in Documents/Arduino. If you have disallowed access to Documents, Teensyduino may fail to open. To solve this problem, open System Preferences, click Security & Privacy, and select Files and Folders. Then find Teensyduino on the list of applications which have requested access to your Documents Folder. This box must be checked for Teensyduino to work.

All: Serial + Keyboard + Mouse + Joystick requires Mac OS X Lion, or Windows XP SP3, Vista SP1, or Windows 7, or Linux or later. Mac Snow Leopard and Windows XP SP2 do not support Serial when combined with other types.

Windows & Linux: When using the Serial Monitor with the USB Keyboard/Mouse option, sometimes a "teensy gateway communication error" can occur. Close and reopen the serial monitor to regain communication.

Windows: You may need to run the Teensyduino installer as administrator for it to install all files. Some anti-virus programs can also interfere with installation and must be temporarily disabled. A Norton AntiVirus Workaround was sent by Carl B.

All: The Upload button can only work if your Teensy is running a previously loaded sketch. If your board can not be rebooted automatically, a message will ask you to press the reset button.

Mac OS X: When you run Arduino after installing Teensyduino, the Leopard's firewall will recognize the program has changed and will ask again if you wish to allow internet connection (Arduino checks for updates). Teensyduino does not "phone home", but Arduino does! TODO: is this still an issue with recent versions of Arduino??

Linux: By default, the cromwellpsi.com32 and cromwellpsi.com64 files will not have execute permission enabled when saved by most web browsers. Use a file manager or type "chmod cromwellpsi.com32" in a terminal to make the file executable. Then you can run it. In a terminal, type "./cromwellpsi.com32". Replace "32" with "64" if using the 64 bit version, or "arm" if using the ARM (Raspberry Pi) version.

Linux: Teensyduino only works with Arduino from cromwellpsi.com The modified version provided by Ubuntu is not (yet) supported.

Linux (especially Gentoo): Arduino uses the AVR toolchain provided by your system. As of December , Gentoo's avr-gcc is horribly broken. Some newer Fedora (avr-gcc x) also have trouble. Faulty AVR toolchains are a persistent problem on Linux.

Please report bugs to paul@cromwellpsi.com

Credits

The Teensyduino installer is based in part on the work of the FLTK project (cromwellpsi.com).

Numerous files covered by various open source licenses are installed by Teensyduino. Nearly all are provided in source code form. Please refer to the comments within each file for copyright and licensing information.

Files installed in compiled binary format that are based on code licensed under the GNU General Public License have their corresponding source code installed in a "src" directory. On Macintosh, use control-click on Arduino and select "Show Package Contents" from the menu.

The ARM toolchain source code (with PJRC's patches) is available on GitHub.

Источник: [cromwellpsi.com]

IX 1.6.13 serial key or number

Arduino Software Release Notes

ARDUINO [ide] * Fixed crash on MacOSX >= with multiple monitor setups. * The boards in the boards list in the "Tools" menu are now grouped by platform. This should make the selection easier when there are lots of boards loaded in the IDE. (thanks @matthijskooijman) * Fixed save of proxy username/password settings in "manual proxy" section. * In "Tools / Programmers" menu only shows programmers related to the currently selected board. (thanks @matthijskooijman) * Fixed: sketch window out-of-display if the IDE is restarted after removing an external monitor. * Allow baudrate/config change when the Serial Monitor/Plotter is disabled. (thanks @matthijskooijman) * Updated jmdns to Should improve network board detection. * Optimized libraries scanning during startup. (thanks @ricardojlrufino) * Better vertical centering of file names in tabs. (thanks @ricardojlrufino) * Better console rendering of progress bar during upload. (thanks @matthijskooijman) [arduino-builder] * FIX REGRESSION: Fixed precompiled libraries containing "wrapper" code that has to be compiled together with the precompiled part. * Removed automatic '--relax' for compiles on Atmega MCU * Fixed skethbook+bootloader hex merger when the bootloader is in .bin format. * Fixed relative path errors when traversing different partitions (in particular on macosx for larger sketches) * Added #define variable during lib discovery phase * Improved progress report from compile [core] * Updated AVR core to - Wire class now supports timeout - Upgraded avr-gcc to atmelarduino7 ARDUINO [ide] * Reverted the bundled Java JRE to the latest freely redistributable Oracle JRE for all platforms except: - macOS (due to notarization) - aarch64 (due to missing graphical support) Switching to AdoptJDK demonstrated to be more challenging than expected, bringing in some corner case bugs that were not being caught by our testing procedures: - cromwellpsi.com To guarantee the best user experience we decided to revert to the latest working JRE until all the issues are resolved. * Improved visualization of compiler errors (@matthijskooijman) * Fixed: "Comparison method violates its original contract" error in library manager * Serial monitor is no more cleared during upload, so it can be copy/pasted (@PaulStoffregen) [arduino-builder] * FIX REGRESSION: library priority selection for bundled libraries (like SD or Ethernet) * FIX REGRESSION: use AVR core installed via Board Manager (when present) instead of the one bundled in the IDE * Improved precompiled libraries handling * FIX: paths with spaces are now correctly printed in compiler output ARDUINO [ide] * FIX: Serial plotter do not hang if empty lines are received * A lot of accessibility improvements in Libs and Board managers GUI for screen readers (thanks @joew) * Sligtly improved support for themes in Libs and Board managers (thanks @matthijskooijman) * Serial plotter: added serial input text field (thanks @cactorium) * MacOSX: support for notarization (thanks @PaulStoffregen for the support) * Fix wrong bracket match rectangle on auto format (thanks @magedrifaat) * Pluggable discoveries: cromwellpsi.com and cromwellpsi.com are now available as variables (thanks @PaulStoffregen) [arduino-builder] * FIX: missed library-detection cache (forcing lib detection on each build) * FIX: Windows: the build folder may reside on a different partition * FIX: Segfault in arduino-builder with -dump-prefs if no sketch is specified * FIX: Allow loading of global user-define cromwellpsi.com * FIX: Fixed nil pointer exception on some rare case with multiple libs * FIX: Print "multiple libraries found for header.h" message only when it really happens * FIX: Fixed library priorities on some rare circumstances [hardware] * updated AVR core to [wifi-updater] * updated to ARDUINO [ide] * Live font resize now applies to console and serial monitor too @Pieter * Make it easier to build the IDE from sources on Windows @Pieter * Smaller Preference window, suitable for supersmall screens * Cache downloaded json and only retrieve them when changed @mattiabertorello * Suspend serial monitor if the board gets disconnected abruptly * Libraries can now declare dependencies that will be proposed during lib installation * SerialPlotter: allow adding labels @chromhelm * Support cromwellpsi.com archives for Board Manager @vowstar * SerialMonitor: add command history (via arrow keys) @Pieter * Accessibility: add checkbox to enable accessibility in Preferences @joew This mode enables a plethora of improvements on voiceover and keyboard navigation. eg. links become accessible buttons, lists are scrollable via arrow keys without much pain [wifi-updater] * Add latest NINA firmware [hardware] * Bundle new avr toolchain (fixes lto issue with and 64bit compatibility with upcoming macOS Catalina) [arduino-buidler] * update to (based on the new arduino-cli) ARDUINO [ide] * New target! ARM64 boards are now fully supported (Nvidia Jetson and RaspberryPi3 with 64bit operating system) * Fix UTF8 related bugs on Windows * Fixed: can now compile again using OpenJDK (removed dependency on JavaFx) * Fixed: only use touchBar on OSX or higher * PluggableDiscovery: easily add your own discoverer and make it available in Boards/Port menu (thanks @PaulStoffregen for the idea and the initial implementation) * LibManager: reduce slowdown when searching * Fixed: ensure a sketch line is visible when it contains an error and must be highlighted * Linux: the installer now tries to install a symlink is /usr/local/bin (this doesn't affect usual non-systemwide installation) Thanks @2E0PGS [wifi-updater] * Fix firmware upgrade not being available for 3rd party WINC boards [arduino-builder] * Use lexicographic distance as last chance to spot the right library (if every other tecnique failed) * Fix some prototypes being inserted in the middle of a function ARDUINO [ide] * Fixed: command line parsing of version parameters when installing cores/libraries * Platform indexes are now downloaded using https * Fixed: on some newer linux distrubitions, NPE when loading GTK look-and-feel without libgtk2 installed * MacOSX: added touch bar support * MacOSX: do not exit app after closing last window * Fixed: serial monitor timestamps not always printed. Thanks @nitram * Kill active programmer if still alive after closing last IDE window * Fixed: "Export compiled binary" now works also with unsaved sketches * Improved automatic port re-selection after upload * Added scroller to "INCOMPATIBLE" examples menu [wifi-firmware] * Added firmware upgrade for NINA-based boards ARDUINO (bugfix service release) [ide] * Fixed: IDE doesn't start if library_cromwellpsi.com is corruped. * Fixed: IDE doesn't start if a library with invalid version is found. * Fixed: Rare build errors in very complex sketches (like Marlin firmware). * Fixed: Better dialog explaining that MacOSX is now required. Thanks @PaulStoffregen * Fixed: Slow "File" and "Tools" menus in MacOSX * Fixed: Weird Board Manager behaviour if AVR core is downgraded to a version earlier than * Improved first-use usability if the user don't select the serial port. Thanks @PaulStoffregen * Custom "Tools" menu now keeps the order as defined in cromwellpsi.com [core] * AVR: Fixed EEPROM warnings. Thanks @bxparks * AVR: Treat "narrowing conversion" as warning, not error. This will make some libraries to compile again. Thanks @PaulStoffregen ARDUINO [ide] * Updated arduino-builder to - parallel build (improve compile speed) - better reuse of already compiled files - Windows: fixed build for sketch stored under OneDrive cloud folders * Added translations for library types. Thanks @ReAlUA * Added scroller in programmers menu. * Added "accelerator" in scrollable menu, press "a" key while scrolling * Keep "Board Manager" menu item always as first in the menu * "Manage Libraries" is now also in the "Tools" menu. Thanks @feikname * Compiler errors now have both column and line * Serial monitor how has "Show Timestamp" option. Thanks @MichalSy * Improved DPI detection for hi-resolution montior on Linux * Added copy/paste contextual menu in Find/Replace text fields * Fixed long IDE startup time when some virtual/not-connected network interfaces are present * Fixed inconsistent line-endings when saving files on Windows * mdns: Make board disappear via TTL instead of reachability. Thanks @kurtgo * Library Manager: display install/remove buttons with mouse on-hover instead of mouse click * Board Manager: fixed some rare case with corrupted index download * Windows: removed some debug output when running the IDE from command line * Support selectable user-defined themes. User's theme are zip files inside the sketchbook "theme" folder * Library Manager: library search now search also for headers (.h) declared by the library in cromwellpsi.comties * Added "--version" to the CLI. Thanks @yohsuke * Fixed Serial Plotter/Monitor permanently disabled if Plotter fails to open * Fixed window title that sometimes is not updated on "Save as". Thanks @JxJxJxMxNxS * Fixed keybindings for Increase/Decrease font size * Improved accessibility in the Preferences dialog. Thanks @coreyknapp [core] * AVR: Set Optiboot as default bootloader for Nano. This is the bootloader installed on new Arduino Nano boards. If you have a Nano with the old bootloader you must select Tools > Processor > ATmegaP (Old Bootloader) to upload. * AVR core has been moved to its own repository: cromwellpsi.com * Updated toolchain to gcc [wififirmware] * SECURITY FIX: Released fix for WPA2 KRACK vulnerability (latest WINC firmware ). ARDUINO (bugfix service release) [ide] * Added workaround for menu visibility bug in MacOSX beta. Thanks @puybaret * Fixed bug for negative-font-size. * New/Rename tabs now allows names starting with a number. ARDUINO [ide] * IDE Toolbar can now go full width on 4K display. * Environment variable LIBRARY_INDEX_URL is now correctly parsed (LIBRARY_INDEX_URL_GZ can also be optinally specified). Thanks @xardael * Added per-board generic option in config file cromwellpsi.com for disabling control of dtr+rts. Thanks @d-a-v * CLI: fixed missing "cromwellpsi.com" when running without the `--board` option * Linux: fixed desktop icon not launching the IDE in certain Window Managers (thanks @herrold) * Allow setting low values for console size (correctly applies cromwellpsi.com=x in cromwellpsi.com) * Make Preference window fit px height displays * Fix error when renaming an unsaved, newly added file. Thanks @matthijskooijman * Added the ability to increase/decrease font size via keyboard + mouse shortcuts (Ctrl + MouseWheel) * Sketch names starting with a digit are now allowed * Serial monitor is opened on a default position if the multi-monitor setup change (this should fix cases when the serial monitor is opened outside of the visibile space) [libraries] * Fixed wrong folder name for "Adafruit Circuit Playground" library, now it can be updated cleanly. * Fixed wrong include for "RobotIRRemote", now it should not interfere anymore with the real IRRemote. ARDUINO (bugfix service release) [ide] * Fixed RESOURCE_NAME in cromwellpsi.com script * Serial Monitor: added "Clear output" button. Thanks @MichaelSy * added options in cromwellpsi.com for: custom title, comment/uncomment shortcut, always show file extensions. Thanks @MichaelSy * added options in cromwellpsi.com to enable/disable typing assistance (auto close brace, auto indent) * Enabling "Use external editor" option now requires to save all sketches. [core] * AVR: added availableForWrite() method in generic Stream class. Thanks @eric-wieser * AVR: moved flush() method up in the class hierarchy from Stream to Print class. Thanks @matthijskooijman [other] * Update Wifi Firmware Updater plugin ARDUINO [ide] * Fix command line: works again with relative paths (regression) * Fix command line: "--save-prefs" works again (regression) * AVR toolchain has been updated with a tentative fix for the ld-returnedexit-status bug * Update arduino-builder to - avoid name clashing for libraries - cache core archives to speedup compilation consistently * Allow BoardManager to fetch FreeBSD tools (thanks @kevans91) * Serial monitor: the input string box is automatically focused when window is selected * Serial monitor: now can not be opened during upload * Serial monitor: now properly decodes UTF8 characters (thanks @aknrdureegaesr) * Serial monitor: added k, 1M and 2M baudrates (thanks @dsstutts) * Updated RSyntaxTextArea to (textarea component) * Updated jmdsn (mDNS discovery) * Allow plugins to attach a listener to compile progress (thanks @tomneutens) [core] * Add Atmel-ICE and JTAGICE3 programmers for AVR chips (thanks @matthijskooijman) * AVR: Set unused bits of extended fuse to 1, should remove some avrdude warning during burn bootloader (thanks @descampsa) * AVR: USB: send ZLP when needed (allows full 64 bytes packets) * AVR: USB: use IAD descriptors instead than Generic (thanks @cuitoldfish) [other] * SAM platform source code has been moved to its own repository (cromwellpsi.com) - all PRs and issues have been moved as well * Update Wifi Firmware Updater plugin ARDUINO - [ide] * Fixed font rendering not anti-aliased on Windows (regression) * Increased number of colors on serial plotter to 8, thanks @cousteaulecommandant [libraries] * Fixed regression in SD library. Thanks @greiman ARDUINO - [ide] * Linux: running in command line mode doesn't require an X11 display anymore * "Save as" now clears the "modified" status * builder: Paths with strange UTF8 chars are now correctly handled * builder: .hpp and .hh file extensions are now considered valid sketch extension * builder: core.a is not rebuild if not needed (improve build time in particular for big projects) * Fixed swapped actions "Copy for Forum" and "Copy as HTML" * Linux/osx: If an editor tab is a symbolic link it is no more replaced with a real file when saving (see #) * Increased the upload timeout to 5 minutes (it was 2 min, but it may be not sufficient when uploading via UART a big sketch) [core] * Added cromwellpsi.com boards * Added Adafruit Circuit Playground board * Added "-g" option to linker to keep debug information in the .elf file (see #) * avrdude: Added fake configuration for EFUSE on atmega8 part. This solves a long standing issue with "Burn bootloader". Thanks @rigelinorion, @awatterott ARDUINO - [ide] * Improved robustness of Serial Plotter while dealing with malformed or partial data. Thanks @xloem. * Fixed regression on command line upload. * Bugifx installing libraries from command line: the IDE tries to update the libraries index but it didn't use it straight away (this caused issues mainly on CI environments) * Libraries and Boards Managers: if a download error happens (CRC error) the IDE tries to download the file again without the need to remove the corrupted file manually. * Improved serial plotter with horizontal axis and grid. Thanks @duff * Windows: Improved DPI detection * Fixed a bunch of small bugs in the editor. [core] * avr: set default values for "cromwellpsi.com" and "cromwellpsi.com" (allows compatibility with older IDE). Thanks @per ARDUINO - [ide] * Refactor Editor code, solving some long standing bugs and cleaning up everything. Thanks @matthijskooijman * Add initial Cloud API integration. When plugging a new board, if an additional core is needed, the user will be prompted to install it * Improved examples menu organization. Thanks @PaulStoffregen * Recompiled arduino-builder with Go to avoid crash on OSX Sierra [core] * avr: Add support for internal V and V ext. cap analog references on the ATtiny25/45/ Thanks @mischnic * Added String::toDouble(). Thanks @Ivan-Perez * Update to avrdude with patch to ignore unused fuses (burn bootloader works also wih outdated cores) ARDUINO - [ide] * Fixed a serious bug that prevented some 3rd party boards, installed through external cromwellpsi.com URL, to work correctly. * Fixed a bug in boards manager that, in some rare circumstances, could lead to remove bundled tools when uninstalling a previously installed AVR core. * builder: fixed regression about inclusion of files in subfolders of the sketch (see cromwellpsi.com for details) * avrdude: reverted to version , until all discovered regressions are solved (see cromwellpsi.com?q=is%3Aissue+is%3Aopen+label%3A%22Component%3A+Avrdude+%22 for details) ARDUINO - [ide] * A lot of bugfixes to builder: cromwellpsi.com?q=milestone%3A+is%3Aclosed * Libraries can now define the property "includes" in the cromwellpsi.comties to tell the IDE which `#include <>` lines should be added to the sketch when the "Include library" command is used. See: cromwellpsi.com#libraryproperties-file-format * Examples are now filtered by architecture * Added more graceful handling of upload failures * Solved a bug that crashed the IDE with some exotic serial devices [core] * avr: toolchain updated to latest Atmel release cromwellpsi.com The updated tools are now binutils, gcc, avr-libc, gdb * avr: avrdude updated to version * fixed a small bug that caused a compile error on some 3rd party derivatives boards based on Leonardo * sam: added snprintf_P to avr/pgmspace.h stub. Thanks @jantje * avr: Fix TX buffer being overwritten by multiple cromwellpsi.com() calls in slave mode. Thanks @kellerkindt * Another small fix to String iterators. Thanks @Ivan-Perez @Chris--A * Added getTimeout() method to Stream. Thanks @mattb * avr: Fixed USB wakeup event handling, this solves some rare lockups of serial port on some linux distributions * Speed and size improvement on Print::printFloat(..). Thanks @bblanchon * avr: Added cromwellpsi.combleForWrite() for USB-CDC serial ports * avr: Added PIN_* defines to all board variants ARDUINO [ide] * Catch and report errors during parsing contributed index files * Fixed IDE version color on about dialog box. Thanks @ivanebernal * The "always-on-top update notification" popup is now less intrusive. * Fixed untraslated string during IDE startup splash window. Thanks @ivanebernal * New arduino-builder: better core library detection, faster operations when recompiling and more. See cromwellpsi.com * Fixed multitab error reporting * Rework serial port discovery to be faster, less cpu intensive and FTDI friendly * Avoid launching multiple concurrent compile and upload operation * Use hi-res icons for Serial monitor and plotter * Make http://librarymanager and http://boardmanager links clickable from the editor window * Cut/Copy actions are disable when there is no text selected. Thanks @avargas-nearsoft * Added more OSX native (emacs-like) keybindings. Thanks @nopdotcom * Fixed Ctrl+Del: now deletes the word behind the cursor instead of the entire line. Thanks @avargas-nearsoft * Fixed "Verify code after upload" option in preferences. Thanks @gh-megabit [core] * String class now supports iterators. Thanks @Chris--A * sam: Allow 3rd party boards that depend on SAM core to use their own USB vid/pid and manufacturer/product strings. Thanks @philmanofsky. * avr: Check at runtime if 32u4 boards are shipped with new bootloader; if so write bootloader magic value in an unproblematic RAM location * avr, sam: Added "cromwellpsi.comn" to cromwellpsi.com to allow compatibility with older version of Arduino IDE. Thanks @per [libraries] * Bridge / cromwellpsi.com: added support for SSL sockets (Yun firmware >= is needed). ARDUINO - [ide] * Added support for GUI interface scaling for UHD monitors. Thanks to all contributors and testers: cromwellpsi.com cromwellpsi.com * Editor position is saved when closing with Alt+F4 or clicking on the "X" button. Thanks @willie68 * Fixed a NullPointerException when dealing with some rare combination of package_*.json files * Fixed incorrect key bindings handling for changing tab. Thanks @matthijskooijman * MacOSX: Fixed handling of add indent/remove indent shortcuts (CMD+[ and CMD+]) * Fixed incorrect update of available libraries in Library Manager. Thanks @vicnevicne * Serial plotter now correctly resize graphs with negative values. Thanks @vicnevicne * Improved sketch preprocessor when handling C++11 keywords. Thanks @matthijskooijman @igrr * Updates to keyword pigmentation to match Create * Fixed display of LITERAL1 keywords * Added target board information when "Error compiling" message is displayed. Thanks @PaulStoffregen [core] * avr: fixed USB_SendControl() for buffer with len > Thanks @NicoHood * avr: fixed yield() usage inside delay(). Thanks @vbextreme * sam: fixed USB descriptor length * avr: reduced boiler-plate for ISR declarations. Thanks @paulo-raca * avr: added Timer3 support for atmega/p. Thanks @feilipu * sam: added USB CDC send break support and readBreak API [libraries] * Added support for Arduino/Genuino to: TFT, Ethernet, SD * SD: the library is now board-agnostic. Thanks @feilipu ARDUINO - [ide] * New arduino-builder: faster, better prototype generation and library discovery logic, and more. See cromwellpsi.com * Serial plotter now allows to plot multiple values at once. Thanks @henningpohl * New translations * Added support to file:// protocol for boards manager URLs * Portable sketchbook folder can now be any arbitrary location * Fixed a bug that caused Boards Manager to install the same tool twice or more, thus wasting disk space, if other cores where using tools delivered by arduino * Fixed various Boards manager glitches, in particular when removing a board * Windows: Arduino IDE icon is now in high definition, bye bye that blurry icon * Remote upload without SSH is now supported (allows OTA upload for many 3rd party boards). Thanks @me-no-dev. [libraries] * SPI: Added cromwellpsi.comer16() function to SAM core. * Ethernet, WiFi, SoftwareSerial: Fixed flush() behaviour: the flush function is no more dropping the receive buffer, as per API specification. Thanks @drmpf [core] * Fixed wrong timings for HardwareSerial::flush() in SAM core. Thanks @borisff * Stream: Optional lookahead and skipChar options added to parseInt and parseFloat, parseFloat also support parsing floats without a leading 0, Stream::find(char) added to SAM. Thanks @Chris--A. * Leonardo/Micro (and other atmega32u4 based boards) now have SerialUSB alias for Serial * Leonardo now has LED_BUILTIN_RX/TX definitions in variant file. Thanks @NicoHood ARDUINO - [ide] * Switched to Java 8, which is now both bundled and needed for compiling the IDE * Added link to unofficial boards support list in preferences * Limit of possible new sketches in a day raised to Thanks @Chris--A * Windows: fixed a bug when running username had non ASCII chars * Lots of fixes * ArduinoISP examples moved under ArduinoISP folder * MacOSX: binary is now able to tell the IDE its current working directory. Eases life to those using the IDE from the CLI * CLI: if specified board doesn't exist, fail instead of using a default one * Windows: IDE stores its stuff under %LOCALAPPDATA% instead of %APPDATA% (which was a roaming folder). %APPDATA% content is automatically migrated to new location * Added baud rate to serial monitor. Thanks @Chris--A * When changing tab, file name is shown in window title * IDE groups compiled files into "libraries", "core" and "sketch" folders * Added Serial Plotter. Thanks @henningpohl * Editor: triple click selects whole line * Windows: IDE startup feels faster * Examples of libraries with a .development flag file in their root folder won't get marked as read-only. See # * Update notifications: when updates are available from either Library or Boards Managers, a popup will be shown * Introducing arduino-builder, a command line tool that properly calls gcc. Fixes lots of issues about buggy preprocessing. * Each open sketch gets built in its own folder, allowing the IDE to recycle previous compilations and being much faster * "Go to line": CTRL+L or Edit > Go to line will open a dialog where you can type the line number where you want the editor to jump to * Added cromwellpsi.com support: like cromwellpsi.com, allows to enrich a cromwellpsi.com definition without modifying the original file. Thanks @Wackerbarth * Library to library dependencies: when your sketch imports a library, and that library uses another, the IDE will find out without you having to add a useless #include to your sketch * Allow per-platform cromwellpsi.com Thanks @PaulStoffregen * Allow spaces in IDE install path on Linux. Thanks @matthijskooijman * Fixed a lot of documentation. Thanks to @per @q2dg * Fixed parsing for SystemProfiler when scanning for available serial ports on Macosx El Capitan [libraries] * Bridge: cromwellpsi.comted() returns true if there are bytes available for read. Thanks @RobAtticus * Bridge: cromwellpsi.com() now empties all buffers. Thanks @RobAtticus * Ethernet: Added missing keywords. Thanks @per * Ethernet: Fixed cromwellpsi.com_aton() function. Thanks @jhorck * Ethernet: Expose optional DHCP timout parameters to Ethernet:begin(). Thanks @chaveiro * Wire: Implemented cromwellpsi.com(). * Wire: Fixed bug with repeated START for AVR. Thanks Nate Williams * Wire: Resolved timing issues on AVR. See # # * Wire: Fixed bug in repeated start in slave mode on SAM. See # * SD: Change "char *" to "const char *" on methods accepting a string as a parameter. Thanks @Ivan-Perez * Scheduler: Added support for cortex-M0. Thanks @PeterVH [core] * Added new PluggableUSB and HID support. This change introduces a more powerful API for libraries that wants use advanced features of USB-Device. Thanks to @obra @NicoHood @matthijskooijman @nospam @weizenspreu * AVR: fixed wrong turnOffPWM() for TIMER0B. Thanks @gonzoveliki * AVR: added support for AtmegaXXu2. Thanks @NicoHood * AVR: a bunch of USB Core bug fix. Thanks @NicoHood * AVR: Expose serial setting from USB-CDC serial port. Thanks @matthijskooijman * ArduinoISP is now compatible with every architecture (not only AVR) and is much more stable. Thanks @PeterVH * Print not aborting on write() failure. Thanks @stickbreaker * AVR: Faster interrupts patch. Thanks @xxxajk * AVR: Fixed pulseInLong wrong measurements. * AVR: Removed a bunch of compiler warnings. Thanks @NicoHood * Improved variants files for Boards Gemma and Ethernet ARDUINO r5 - [ide] * Fixed a but preventing upload on boards that do not supply VID/PID. See # ARDUINO r4 - [ide] * Added support to Genuino boards ARDUINO r3 - [ide] * Fixed Mac signature for OSX >= ARDUINO r2 - [ide] * Windows: fixed a problem that prevented opening the IDE when double clicking a .ino file ARDUINO - [ide] * File, Sketch and Tools menu items are properly handled when switching between different windows * Sketch > Export compiled Binary: saves the compiled binary (hex, bin) into the sketch folder. Thanks @championswimmer * New editor, based on RSyntaxTextArea. Thanks @ricardojlrufino * New keywords. Thanks @Chris--A * Easier "additional boards manager url" field: a wide text area opens by clicking the added button (right side of the text field) * Rewritten code of Preferences window: its content is now correctly drawn on every OS * Fixed a bug that made the IDE notify users of invalid libraries too many times. Thanks @Chris--A * Removed JNA. Less native stuff and less chances of incurring into an UnsatisfiedLinkError * Many new and old issues closed. Thanks to many, and @Chris--A in particular * Faster libraries list update * Serial monitor stays opened during upload, disabled. Thanks @avishorp and @Wackerbarth * CLI: --get-pref can now be called without a pref name. If pref name is missing, IDE dumps all preferences * Holding SHIFT when hovering the save icon will trigger a "Save As" * Removed proxy settings from File > Preferences: IDE will use system settings * Linux versions bundle the latest JVM, _45 * Local docs: if your sketch has a "docs" folder, you can add local links to it. For example file://./docs/cromwellpsi.com will use your browser to open file cromwellpsi.com from the "docs" folder of your sketch * When using "external editor" mode, sketch code is updated when the IDE gets focused * Added keyboard shortcuts to IDE menus: ALT+F for File, ALT+E for Edit and so on * Added support for Dangerous Prototypes Bus Pirate as ISP * Added "Close" button to Boards/Libs Managers, in order to help linux people with weird Window Managers * Added File > Open Recent menu, showing the last 5 opened sketches * Windows: added Arduino Zero drivers * Tons of minor fixes [libraries] * LiquidCrystal fixes. Thanks @newbie15 * Added SPI Transactions to TFT lib * Stepper: support for 5-phase/5-wires motors. Thanks @rdodesigns * Stepper: increased precision in timing calculations. Thanks @ekozlenko * Firmata and Temboo: dropped our vesions, tagged released are downloaded from their respective git repos [core] * AVR: delayMicroseconds(..) doesn't hang if called with 0. Thanks @cano64 * AVR: delayMicroseconds(..), added support for 1Mhz, 12Mhz and 24Mhz. Thanks @cano64 * AVR: added missing case in detachInterrupt(). Thanks @leres, @vicatcu * SAM: added watchdog routine for Due. Thanks @bobc * AVR+SAM: reworked pulseIn() function to become GCC agnostic * AVR+SAM: added pulseInLong() (based on micros()) to help getting good results in interrupt-prone environments * AVR: fixed regression in cromwellpsi.com(). Thanks @chromhelm ARDUINO - [ide] * Added support to Arduino Gemma * Restored previous "error" colour in black lower part of the IDE * Relaxed IDE checks against libraries versions * Fixed colour of 'char' keyword. Thanks @mixania * Tools submenu show selected subentry. Thanks @PaulStoffregen * Boards and Libraries Managers command line (with contribs from @Lauszus): --install-board "arduino:Arduino SAM Boards (bits ARM Cortex-M3)" and --install-library "Bridge". Version can be omitted: if omitted, latest version available is automatically picked * Warning levels can be set in File > Preferences * When compilation fails, editor highlights the reported row * Windows and MacOSX: updated bunbled JVM to _45 (latest available atm) * Disabled "uncertified" warning (requires avr core >= , sam core >= ) * Additional boards/cores can be listed specifying comma separated list of package_SOMETHING_cromwellpsi.com url in File > Preferences * MacOSX: fixed wrong sketch opened when double clicking on a .ino file * Boards and Libraries main files are downloaded directly (no proxy php script), fixing some glitches when using a proxy server * Added notification if the bundled AVR core is newer than the one installed through Boards Manager (useful when upgrading the IDE) * Fixed error when in Serial and Network discovery that was leaving the Ports menu greyed out * IDE now deletes temporary files on exit. When using the CLI, --preserve-temp-files arguments skips deletion [libraries] * Bridge fixes * SD: allow multiple SD instances (@squelched) * SD: fix examples with Ethernet shield ARDUINO - [ide] * Fixed an ArchiveExtractor issue when dealing with native stuff, affecting some linuxes * MacOSX: MACOSX_BUNDLED_JVM property is automatically set to JAVA_HOME if not provided * New splashscreen image * New editor theme * MacOSX and Windows: https links were not working, fixed [core] * Upgraded toolchains: statically compiled, ship with Link Time Optimization plugin (disabled by default) * Restored backward compatibility by providing a cromwellpsi.com in-memory rewrite: old values (eg: cromwellpsi.com) are converted to new values * cromwellpsi.com rewriting can be disabled if target platform has a "rewriting=disabled" key/value pair set * AVR bundle files (core files and toolchain) is again inside IDE "hardware" folder, instead of unpacked into user's home folder at first IDE startup * Advise of duplicate libraries after compiling. Thanks @PaulStoffregen ARDUINO - [ide] * Boards and libraries managers, for one click install of additional boards and libraries * In cromwellpsi.com, pre and post build hooks can now be specified. Example: cromwellpsi.comldpattern=echo "Hello {cromwellpsi.com}". Thanks @Wackerbarth * Windows and MacOSX JVM Xmx halved to M * Introduced starting splashscreen with progress status: will be used for notifying user of long running startup tasks * Available ports list is now generated in background: hence "tools" menu is much faster * MacOSX: appbundler merged our contribution, switching to upstream version cromwellpsi.com [core] * Stream: fixed bug in findUntil routine # @Xuth [libraries] * EEPROM: Replaced existing library with more complete implementation @Chris--A * SD: fixed endless timeout on 32bit core (Due) @Timmmm * Ethernet: fixed headers include path * SPI: do not influence state of SS pin if it's already been set as output by user sketch @vicatcu * Bridge: discard message if received length is bigger than rx buffer @arve0 ARDUINO - [ide] * Improved Yun detection for upload via network (Ron Guest) * In cromwellpsi.com "objcopy" recipe is no more tied to the "hex" format (Arnav Gupta) * /dev/cu.* serial ports are now filtered from the port list on MacOSX * Ports in ports list are now grouped by type * Upgraded avr-gcc toolchains to * Fixed: wrong parsing of cromwellpsi.com when using submenu and boards id with underscores * Windows: updated bundled JVM to latest 8u31 * Windows: JVM memory settings can be customized editing cromwellpsi.com and arduino_cromwellpsi.com files * "new" button now behaves as "File -> New" menu: a new window with an empty sketch is created * Windows: opening a lonely sketch caused the IDE to crash. Fixed with a bounty on bountysource @gerito1 * Bridge: fixed bug with multiple and failing cromwellpsi.comt calls @sngl * Translations updated * Improved SoftSerial library and optimized its memory usage @matthijskooijman * Fixed: status board was not changing when using custom menu @PaulStoffregen * Fixed: better error message when using a busy serial device * Fixed: missing bool operator on EthernetClient * Fixed: missing bool operator on SoftSerial * MacOSX: back to native file dialogs and buttons, when using experimental version * MacOSX: command line interface now works also with java-latest version * Improved library name matching @PaulStoffregen. Avoids conflicts with libraries that bundle files equally named ARDUINO - [ide] * Updated help with the latest docs * Updated translations ARDUINO rc3 - [ide] * Bunch of bugfix on MacOSX build (cromwellpsi.com) ARDUINO rc2 - [ide] * Reenabled speed of on serial monitor * Improved Find/Replace dialog layout (Eberhard Fahle) * Fixed missing .dll error on some Windows box [core] * Arduino "boolean" type is now mapped to "bool" instead of "uint8_t" (Christopher Andrews) * sam: HardwareSerial now has buffered transmission (Collin Kidder) * sam: HardwareSerial fixed modes (parity, data bits, stop bits) (bluesign2k) * avr: Fixed regression in pulseIn() function accuracy [libraries] * GSM: minor changes and bug fix (cromwellpsi.com) The following changes are included also in the Arduino IDE [ide] * Mitigated Serial Monitor resource exhaustion when the connected device sends a lot of data (Paul Stoffregen) ARDUINO rc1 * IDE internals have been refactored and sorted out. (Claudio Indellicati) cromwellpsi.com The builder and the GUI now have clearly separated source code making it easier for IDE developers to maintain and propose patch. From a user point of view nothing changes and the IDE should behave exactly as before. [ide] * Autosave on sketch Upload/Verify (Fulvio Ieva) * Sketch build process: fixed full rebuild on windows even if not needed * Sketch build process: core.a rebuild only if needed (Matthijs Kooijman) * Updated AStyle formatter to v cromwellpsi.com * Improved avrdude verbose upload (Matthijs Kooijman) * (Mac OSX) Add Exported UTI for ino files, allows quick look to view the content of the file and external editors to syntax highlight as C++ (Matt Lloyd) * Updated libastyle to [core] * sam: added -MMD flag to let gcc produce dependency files (full rebuild on Arduino Due is now triggered only if needed) [libraries] * LiquidCrystal: added setRowOffsets function to support different LCD hardware configurations (Mark Sproul) * LiquidCrystal: various improvements and optimizations (Matthijs Kooijman) * Fixed PROGMEM error in Robot_Control/examples/explore/R06_Wheel_Calibration * SD: Fixed SPI transaction mismatch (Paul Stoffregen) The following changes are included also in the Arduino IDE [libraries] * EthernetClien: use IANA recommended ephemeral port range, (Jack Christensen, cifer-lee) [core] * Fixed regression in HardwareSerial::available() introduced with cromwellpsi.com ARDUINO BETA - [ide] * Find/Replace over multiple tabs (Erwin Ried, Fulvio Ieva) * Fix wrong "Replace" behavior with empty "Find" field (Fulvio Ieva) * A lot of command-line improvements (Matthijs Kooijman) * Cursor is not moved when invoking autoformat [libraries] * SPI: added transaction API (Paul Stoffregen) cromwellpsi.com cromwellpsi.com#!msg/developers/TuZLfjeZjDI/6deNjw3Y9m4J * FileIO bridge: fixed wrong return value in File::size() for size > * Updated Temboo to latest version * Updates/Fix to various examples [core] * sam: "new" and "delete" do not bring in 50Kb of stdclib anymore * Correct implementation of gcc specific internal functions (__cxa_guard_*) (Alexey Guseynov) * Fix for upload problems on Leonardo (and derivative boards based on mega32u4) * Small improvements on String class (Matthijs Kooijman) * Fixed size of available flash for mega boards (Leonardo Milani, Arnav Gupta) * sam: removed useless empty digitalPinToTimer(..) macro stub (Bill Perry) The following changes are included also in the Arduino IDE [core] * avr: Added replacement stub for cstdlib atexit() funciton (Christopher Andrews) ARDUINO BETA - [core] * Upgraded AVR toolchain: gcc , avr-libc * Upgraded ARM toolchain: gcc q1 * Upgraded avrdude to version * ARM gcc doesn't require ialibs anymore on 64 bits linux systems * avr: fixed typo in SerialEvent3 handling (Matthijs Kooijman) * avr: HardwareSerial support for different size of TX and RX buffer sizes (Jan Baeyens) * avr: HardwareSerial support for buffer sizes bigger than bytes (Jan Baeyens) * sam: Added configuration (parity, data bits, stop bits) to Serial1/2/3 of Arduino Due (bluesign2k) * Removed a lot of compiler warnings from Arduino core * avr: Fix EXTERNAL_NUM_INTERRUPTS for atmegarfa1 and atmegarfr2 (Matthijs Kooijman) * sam: Fix to Wire::endTransmisson() return value (bluesign2k) * sam: Fix to Wire usage of TWI status register (bluesign2k) * avr: Fixed PROGMEM statements to be compatible with newer avr gcc (Scott Howard) [ide] * Moved to appbundler for building releases for MacOSX. (Haavar Valeur) This should remove dependency from Java on recent MacOSX. * Added support for '-' and '.' in filenames (Georg von Zengen) * (re)Added 'arduino_cromwellpsi.com' in Windows build for debugging purposes * Magic baudrate is no longer removed (it was a workaround for RXTX) (for more info see github issues: # and #) * Allow overriding cromwellpsi.com using cromwellpsi.com (Matthijs Kooijman) * Explicitly define cromwellpsi.com in avr/cromwellpsi.com (Matthijs Kooijman) * Make the low available memory message a warning (Matt Robinson) * Proceed with upload even if port can't be found (David Mellis) * Added support for ArduinoISP * Windows: added board detection on serial port menu [libraries] * Updated SpaceBrew library * Fixed HttpClient::running() function * Fixed HttpClient::ready() function (Manuel Rabade) * Added HttpClient::noCheckSSL() method * Improved speed of YunSerialTerminal * Fixed CRC of shutdown command on YunSerialTerminal example * Updates/Fix to various examples * Added cromwellpsi.comck(..) method (Kristian Sloth Lauszus) The following changes are included also in the Arduino IDE [core] * avr: Improved USB-CDC write speed (Justin Rajewski) * avr: Improved USB-CDC read code (Paul Brook) * avr: Fixed race condition in USB-CDC transmit (Paul Brook) * Fixed wrong NULL pointer handling in Stream class (Amulya Kumar Sahoo) * Added initVariant() hook to allow 3rd party variant-specific initialization [ide] * Fix toolchain command line to compile assembler files (Jimmy Hedman) * If two libraries have the same header file use the lib with the same folder name (Paul Stoffregen) [libraries] * Robot_Control: removed duplicated SPI and Wire (Xun Yang) * Robot_Control: fixed issue on motors being opposite (Xun Yang) * Robot_Control: updated turning algorithm (Xun Yang) * Esplora: added reading form Tinkerkit inputs * SoftwareSerial: Fix idle level when initializing with inverted logic (Jens-Christian Skibakk) [firmware] * Wifishield: fixed paths on firmware upgrade scripts ARDUINO BETA - [ide] * Implemented library specification Rev.2 (cromwellpsi.com) * Replaced RXTX library with JSSC (Alexey Sokolov) cromwellpsi.com * If two libraries provides the same .h file prioritize the library with tha same folder name * Improved command-line parsing (Matthijs Kooijman) * Windows: added arduino_cromwellpsi.com to help debugging errors when launch4j fails to start IDE [libraries] * TFT: warning messages in PImage class and strings inside examples now stored in flash to save RAM. * Ethernet: added operator == for EthernetClient class (Norbert Truchsess) * Robot_Control: removed embedded copies of Wire and SPI to allow their use in sketch. Old sketches using Robot_Control now must include Wire.h and SPI.h. * Robot_Control: fixed issues about motor turning algorithm * Bridge: optimized cromwellpsi.comer() (bobh66) [core] * avr: Pile of HardwareSerial improvements (Matthijs Kooijman) - Remove duplicate code from HardwareSerial::begin() methods - Simplify HardwareSerial::begin() (Rob Tillaart) - Use constants for register bit positions in HardwareSerial - Fix HardwareSerial::flush() when interrupts are kept disabled for a while - Fix lockup when writing to HardwareSerial with interrupts disabled - Disable the UDRE interrupt sooner in HardwareSerial (Nathan Blackwell) - Put each HardwareSerial instance in its own .cpp file in order to save memory for unused UARTS - In HardwareSerial::write, bypass the queue when it's empty in order to improve throughput when using high baudrates (KurtE) * sam: Fixed wrap-around bug in delay() (Mark Tillotson) * sam: Fixed regression in analogRead() (fails to read multiple channels) (Mark Tillotson) * sam: Fixed loops in cromwellpsi.com (Matthijs Kooijman) * sam: Optimized delayMicroseconds() (Rob Tillaart) # * sam: added itoa() and related functions * Optimized Print::print(String&) method, now uses internal string buffer to perform block write * Improved portability of String class (maniacbug) # * Make some operators in IPAddress const (Matthijs Kooijman) * Fix for compiling assembler files with newer gcc ARDUINO r2 BETA - * Signed drivers for Windows * Fixed Windows drivers signature (that prevented installation on some Windows 8.x OS). Now the signature is timestamped and should not expire. ARDUINO BETA - NOTICE: The library format is under heavy review on the Arduino Developers mailing list. We suggest to delay the adoption of the new format until a stable x is released. [ide] * Added missing keywords: YunServer, YunClient, pow * Improved folder ignore: now hidden, starting with a dot, and SCCS folders are ignored * Improved auto format: now handled by Artistic Style cromwellpsi.com * Improved SSH uploader (Arduino Yun): uses file ~/.ssh/config if available. Allows public key only authentication and ssh servers listening on ports other than * Font anti-aliasing now ON by default (users will have to either delete or manually edit their cromwellpsi.com file) * Added warning message when opening sketches with additional files with illegal names * (windows) Upgraded embedded Java runtime to version 7: much faster startup * Improved files open/save dialogs * Added line numbers, can be enabled/disabled from preferences (Cayci Gorlitsky) * Removed check on forbidden file in formatted libraries (#) * (windows) Updated msysdll to the latest version (Windows compatibility) * Using [code] tag instead of [quote] in "Copy for forum". Removed color coding. * When an hardware addon reference another core also the libraries are referenced. * It's now possible to specify additional custom board parameters from command line. * Sketches path can be relative (#) * Example and Boards are now scrollable. * Fixed localization issues that sometimes prevented the IDE to start. * Added "Using library" debugging message in verbose compile. * Improved preprocessor (fixes #, #, #, #, #) * Fixed StringStartsWithEndsWith, KeyboardMessage, LCD CustomCharacter, Blink without delay, SD List files, Arduino Robot examples * Added PID/VID for older Arduinos * (mac) Improved board autodetection on Mac OS X [libraries] * Bridge: Fixed buffer overflow in File::doBuffer() (dreggy) * Bridge: Fixed timeout in Bridge::transfer() * Bridge: Fixed return value of Bridge::get(..) (returning 0 with valid data len >0) * Bridge: Implemented multi-byte File::read(..) * sam: Fixed SPI initialization (when using extended API and multiple CS) * Partially fixed the behavior of EthernetClient::flush(), now it doesn't discard incoming data BUT it doesn't wait for outgoing data to be successfully transmitted. * Esplora: Added support for display GREENTAB_L [core] * sam: Fixed wrong initialization for ADC timings (analogRead speed Arduino DUE improved by a factor x10) cromwellpsi.com (cromwellpsi.com) * avr: Fixed wrong extended fuses on Arduino Yún when using external programmer * Added LED_BUILTIN metadata in variant files * avr: Refactored Mega* variants definitions in cromwellpsi.com (Kristian Sloth Lauszus) * avr: Removed File object destructor. In order to free memory allocated by a File object the safest way is to call its close() method * Added digitalPinToInterrupt variant macro (Paul Stoffregen) * avr: added variant file for Arduino Ethernet * Added SERIAL_* metadata in variants files (Paul Stoffregen) ARDUINO BETA - [ide] * Revert to English locale if the system default is not available * Added support for Arduino Yun * Autodetect of boards connected to each serial port * Network upload and discovery for Arduino Yun [libraries] * sam: fixed wrong SPI initialization (noblepepper) * updated all instances of Adafruit_GFX to the latest version * added libraries for Arduino Yun [core] * avr: fixed bug introduced with recent optimizations in HardwareSerial (atmega8 cpu) (darryl) ARDUINO BETA - [ide] * Removed useless baud rates from serial monitor * Fixed some minor IDE UI bugs (Shigeru Kanemoto) * Added support for new Library format (cromwellpsi.com) * Pass board type from cromwellpsi.com (cromwellpsi.com) * Display estimated RAM usage after compile (Loren M. Lang) * Import library menu is now scrollable * Scrollable menus can now be scrolled with the mouse wheel [arduino core] * sam: Fixed delayMicrosecond() when interrupts are disabled (Paul Stoffregen) * sam: Upgraded libsam, and added missing modules (CAN, ETH, etc.) (Thibaut Viard) * sam: Added compatibility for avr/pgmspace.h (Paul Stoffregen) * sam: Added serialEvent*() support * sam: Fixed micros() to work with inside interrupts. (stimmer) * avr: Added support for Flash strings on String class (Jantje) * Added support for floating point numbers in String class (Tevin Zhang, SebiTimeWaster) * sam: Fixed String buffer overflows (Paul Stoffregen) * avr: Added recipe for assembly files (C. A. Church) * avr: Use analogPinToChannel if it's defined (Kristian Sloth Lauszus) * avr: Optimized HardwareSerial buffer (Matthijs Kooijman) * removed unused flags from String (free 1 byte of SRAM) [libraries] * sam: Removed CAN library, you can find an updated version here: cromwellpsi.com * sam: Bugfix SPI library: begin() after end() now works (stimmer) * sam: Bugfix SPI library: incorrent pin configuration in non-extended mode. * Ported all libraries to new format * Updated Firmata to version (Jeff Hoefs) [firmwares] * Arduino Due: fixed USB2Serial garbage at startup (cromwellpsi.com) [other] * Merged all improvements made in Arduino IDE ARDUINO BETA - [ide] * Scrollable editor tabs (Shigheru KANEMOTO) * Scrollable menus * Portable Arduino (Shigeru KANEMOTO) * Default sketchbook folder for linux is now "Arduino" * Fixed IDE startup bug "Menu has no enabled items" * Command line build. * Fixed some language strings (Shigeru KANEMOTO) * Fix to cromwellpsi.com: added Micro and fixed Lilypad bootloader path * Removed check for ".h" existence in libraries. * Deleting tab from IDE does not delete from temporary folder * Fixed NPE when unknown boards/platforms are selected in preferences * Extended command line build flags * Undo/Redo move cursor and focus to where the code has been undone/redone [arduino core] * sam: attachInterrupt() now works also on pins that belongs to PORTD * sam: portOutputRegister() is now writeable. * sam: fixed issue on weak-symbol for some interrupt handlers * sam: fixed BSoD on some Windows machine (louismdavis) * sam: added CANRX1/CANTX1 pins 88/89 (same physical pin for 66/53) * sam: fixed analogWrite when used in very thight write loops (cromwellpsi.comh) * sam: fixed cromwellpsi.com() while sending big buffers (Bill Dreschel) * sam: SerialUSB receive buffer size is now (PeterVH) * sam: Fixed SerialUSB data handshake when host sends a lot of data (PeterVH, stimmer) [libraries] * sam: Added Servo library * sam: Added WiFi library * Fixed USBHost MouseController example [other] * Merged all improvements made in Arduino IDE * Merged all improvements made in Arduino IDE (not yet released) ARDUINO r2 BETA - * Fixed wrong release file for windows. ARDUINO BETA - * Merged changes coming from stable release of Arduino IDE [arduino core] * added support for yield() function in Arduino Core. This is a preliminar step for experimenting with cooperative Schedulers. [ide] * Simplified boards menu selection. (new cromwellpsi.com file format with custom sub-menus). * Fixed "FAT" (multi-platform) library detection. This bug caused many libraries to be detected as 'invalid'. [sam arduino core] * attachInterrupt() and detachInterrupt() are now working. * Fixed macros to query low level GPIO registers: digitalPinToBitMask(), digitalPinToTimer(), portOutputRegister, portInputRegister() * Fixed analogWrite() on DAC0/1 when writing on both DACs (thanks to smay4finger) [firmwares] * Added firmware for atmega16u2 on Due Board. ARDUINO BETA - * First release for the unified IDE for both AVR 8-bit and ARM bit (SAM3 CPUs) architectures. * This release include the SAM Arduino Core used in the Arduino Due Board. * Everything is in beta, most features or libraries are still missing or incomplete. * For more info refer to this press release: cromwellpsi.com ARDUINO - [core] * avr: Improved USB-CDC write speed (Justin Rajewski) * avr: Improved USB-CDC read code (Paul Brook) * avr: Fixed race condition in USB-CDC transmit (Paul Brook) * avr: Added replacement stub for cstdlib atexit() funciton (Christopher Andrews) * Fixed wrong NULL pointer handling in Stream class (Amulya Kumar Sahoo) * Backported String class from IDE x (Matt Jenkins) * Backported Print class from IDE x * Backported digitalPinToInterrupt macro from IDE x * Added initVariant() hook to allow 3rd party variant-specific initialization * Added replacement stub for cstdlib atexit() function (Christopher Andrews) [ide] * Added compatibility for IDE x libraries layout * Fix toolchain command line to compile assembler files (Jimmy Hedman) * If two libraries have the same header file use the lib with the same folder name (Paul Stoffregen) [libraries] * Robot_Control: removed duplicated SPI and Wire (Xun Yang) * Robot_Control: fixed issue on motors being opposite (Xun Yang) * Robot_Control: updated turning algorithm (Xun Yang) * Esplora: added reading form Tinkerkit inputs * SoftwareSerial: Fix idle level when initializing with inverted logic (Jens-Christian Skibakk) * fixed a bunch of examples [firmware] * Wifishield: fixed paths on firmware upgrade scripts ARDUINO r2 - * Signed drivers for Windows * Fixed Windows drivers signature (that prevented installation on some Windows 8.x OS). Now the signature is timestamped and should not expire. ARDUINO - [core] * [avr] malloc bug: backported avr-libc implementation * [avr] removed deprecated interrupt handlers causing compiler issues with newer avr-gcc. * [avr] added c_str() method to String * [avr] Stream "_timeout" field and related methods are now protected [libraries] * Upgrades to WiFi library * Fixed a bunch of examples * Added Arduino Robot libraries * Added TFT display library [firmwares] * Upgrades to WiFi firmwares [ide] * Backport from install Library from .zip file or folder * Updated windows drivers * Added Windows installer ARDUINO - [core] * Fixed malloc bug (Paul Stoffregen) [libraries] * Fixed memory leak when calling cromwellpsi.com() multiple times. * Fixed SD example cromwellpsi.com * Fixed a lot of Esplora examples * Added GSM library [environment] * Sort entries in cromwellpsi.com (Shigeru Kanemoto) * Fixed some wrong translations * Fixed NPE due to permissions IO error * Updated drivers for Windows (all-in-one, signature for Win8) [bootloaders] * Fixed a bunch of bugs on Mega's bootloader (Mark Sproul) (cromwellpsi.com) ARDUINO - [hardware] * Added support for the Arduino Esplora [environment] * Signed application for MacOSX [core] * Fixed power-up-starts-bootloader in Leonardo (and derivative) bootloaders. (Kristian Lauszus) (cromwellpsi.com) * Fixed digital_pin_to_timer_PGM array in Leonardo variant. * Published updated Wifi firmware * Updated source code for atmega8 bootloader [libraries] * Added baud support in SoftwareSerial (Sébastien Jean) (cromwellpsi.com) ARDUINO - [hardware] * Added support for the Arduino Micro. * Added support for the LilyPad Arduino USB. * For Arduino Mega, having avrdude use "wiring" not "stkv2" for uploads (to improve auto-reset behavior). cromwellpsi.com?id= [environment] * Find-In-Reference now works whether or not text is selected. cromwellpsi.com?id= * Not generating prototypes for functions that already have them. (Lars J. Nielsen). cromwellpsi.com?id= * Improved line numbers for error messages. (Paul Stoffregen) cromwellpsi.com?id= * Automatically create libraries folder in the sketchbook. (Paul Stoffregen) cromwellpsi.com?id= * Tutorial on installing libraries (linked from cromwellpsi.com in the libraries folder). (Limor Fried) * Fix to allow selection of Norwegian. (Rune Fauske) * Fix to race condition / occasional error in compilation. (gandrewstone) cromwellpsi.com?id= * Don't break long C++ comments during auto-format. cromwellpsi.com?id= [core / libraries] * Included WiFi library and wifi shield firmware. * Added ability to specify serial configuration (data bits, stop bits and parity check) in cromwellpsi.com(). (Alarus) cromwellpsi.com?id= * Avoided overruns of the incoming serial (CDC) buffer on the Leonardo. (Peter Van Hoyweghen) * Avoided auto-reset of the Leonardo when opening serial port after upload without specifying a baud rate. (Peter Van Hoyweghen) * Fix for tone() on the Leonardo. (Shigeru Kanemoto) cromwellpsi.com?id= * Fix for SD library on Leonardo. cromwellpsi.com?id= * Added other write functions on Leonardo. cromwellpsi.com?id= * Added support for Leonardo interrupts 2 and 3. (Kristian Lauszus) * Print ovf, inf, or nan accordingly in cromwellpsi.com(). (Nick Gammon) cromwellpsi.com?id= cromwellpsi.com?id= cromwellpsi.com?id= * Fix initialization of SPI data lines. (gandrewstone) cromwellpsi.com?id= * cromwellpsi.com() waits for last byte to transmit. (cromwellpsi.comchi) cromwellpsi.com?id= * Adding overloads so cromwellpsi.com(0) works. cromwellpsi.com?id= [build] * Fix Linux arduino script when there are spaces in directory name. * Pass Linux command line arguments from arduino script through to the Java code. (Allows specifying sketch to open on command line.) [examples] * Included examples for the starter kit. ARDUINO - [environment] * The IDE has been internationalized and translated into multiple languages. Thanks to Shigeru Kanemoto for the internationalization and Japanese translation and many others for the other translations. For more information, see: cromwellpsi.com * Added preference for selecting the language in which to display the Arduino software. Defaults to the operating system locale. * New upload process for the Arduino Leonardo (ATmega32U4). * The editor font size preference now applies to the serial monitor and error / message console as well as the editor. (Paul Stoffregen) cromwellpsi.com?id= * Compilation has been speeded up by only compiling changed files. (All files are recompiled when a new board is selected.) (Paul Stoffregen) cromwellpsi.com?id= * Console log files (cromwellpsi.com and cromwellpsi.com) are now removed when the Arduino software exits. (Paul Stoffregen) * The minimum size for the Arduino software window has been reduced. cromwellpsi.com?id=52 * Improvements to the Find / Replace dialog. (Peter Lewis) cromwellpsi.com?id= * Support for selecting words (on double-click) and lines (triple-click) in the Arduino software. (Peter Lewis) cromwellpsi.com?id= * Don't insert newline when using serial monitor keyboard shortcut. (Lars J. Nielsen) cromwellpsi.com?id= * Added a preference for disabling verification on upload (for increased speed). (Nathan Seidle) cromwellpsi.com?id= * Added the gcc toolchain to the Linux distribution. (To use the toolchain already installed on your system, simply delete the one that comes with the Arduino software.) (Paul Stoffregen) cromwellpsi.com?id= * Updating Arduino Mini upload protocol to 'arduino' from 'stk' (should fix problems with auto-reset not working). [core / libraries] * Updated (and official) support for the Arduino Leonardo (ATmega32U4). Includes new bootloader and various fixes to the core. * Adding overloads to cromwellpsi.com() (for cromwellpsi.com(0)). (Paul Stoffregen) cromwellpsi.com?id= * Fixing delayMicroseconds() for 20 MHz clocks (Erdem U. Altinyurt) cromwellpsi.com?id= * Support third external interrupt on ATmegaP. (maniacbug) cromwellpsi.com?id= * Update reference voltage constants for ATmegaP. (maniacbug) cromwellpsi.com?id= * Adding --relax linker flag for ATmega (arducopter) cromwellpsi.com?id= * Fixing Ethernet library bug on avr-gcc (SurferTim) cromwellpsi.com?id= * Fixed DHCP hostname generation. (peter) * Simplifying microseconds to clock cycles conversions (Rob Tillaart) cromwellpsi.com?id= * Fixed various warnings. (maniacbug) cromwellpsi.com?id= * Fixed bug w/ repeated initial characters in findUntil(). (cromwellpsi.com) cromwellpsi.com?id= * Added INPUT_PULLUP option for pinMode(). The INPUT mode now explicitly disables the pullup resistors. (Paul Stoffregen) cromwellpsi.com?id= * Fixing bug in the receiving of multiple UDP packets. (dylan and peter) cromwellpsi.com?id= * Added ability to generate repeated starts in the Wire library (in master mode). Extra boolean parameters to endTransmission() and requestFrom() control whether or not to send a stop (or a repeated start instead). (Todd Krein) cromwellpsi.com?id= * Added cromwellpsi.comin() to renew DHCP leases. (Peter Magnusson) cromwellpsi.com?id= * Fix for CLOSE_WAIT bug that could cause Ethernet sketches to crash over time. (mr-russ and Johann Richard) * Fix to servo pulse timing calculation. (jwatte) cromwellpsi.com?id= * Added readString() and readStringUntil() functions. (Adrian McEwen) cromwellpsi.com?id= [examples] * Updated to latest ArduinoISP sketch. (rsbohn) cromwellpsi.com?id= * Fixed ArduinoISP sketch by lowering delay() in heartbeat. * Other updates. ARDUINO - [environment] * The file extension for sketches has changed from .pde to .ino, to avoid conflicts with the Processing software ("ino" are the last three letters in "Arduino"). * There are a new set of toolbar icons, including a checkmark icon to verify (compile) a sketch and an arrow for upload. The serial monitor icon has moved to the right of the toolbar. Also, shift-clicking the upload icon now uploads using a programmer (selected in the Tools menu). You can still enable verbose output in the preferences dialog. (Icons were designed by Nicholas Zambetti.) * There’s a new color scheme and about image for the IDE (by cromwellpsi.com). * The name of the currently selected board and serial port are now shown at the bottom of the editor. (Code from Wiring.) * A progress bar is displayed during compilation and upload. (from Wiring.) [core / libraries] * Serial transmission is now asynchronous - that is, calls to cromwellpsi.com(), etc. add data to an outgoing buffer which is transmitted in the background. Also, the cromwellpsi.com() command has been repurposed to wait for outgoing data to be transmitted, rather than dropping received incoming data. * The behavior of cromwellpsi.com() on a byte has been changed to align it with the other numeric data types. In particular, it will now print the digits of its argument as separate ASCII digits (e.g. '1', '2', '3') rather than a single byte. The BYTE keyword has been removed. To send a single byte of data, use cromwellpsi.com() (which is present in Arduino as well). * The Serial class (as well as other classes inheriting from Stream, like EthernetClient, SoftwareSerial, Wire and more) now contains functions for parsing incoming data, based on the TextFinder library by Michael Margolis. They include find() and findUntil() to search for data, parseInt() and parseFloat() for converting incoming characters into numeric values, and readBytes() and readBytesUntil() for reading multiple bytes into a buffer. They use a timeout that can be set with the new setTimeout(). * The SoftwareSerial class has been reimplemented, using the code originally written for the NewSoftSerial library by Mikal Hart. This allows for multiple simultaneous instances, although only one can receive at a time. * Support has been added for printing strings stored in flash (program memory) rather than RAM. Wrap double-quoted strings in F() to indicate that they should be stored in flash, e.g. cromwellpsi.com(F("hello world")). * The String class has been reimplemented as well, by Paul Stoffregen. This new version is more memory-efficient and robust. Some functions which previously returned new string instances (e.g. trim() and toUpperCase()) have been changed to instead modify strings in place. * Support for DHCP and DNS has been added to the Ethernet library, thanks to integration by Adrian McEwen. Most classes in the Ethernet library have been renamed to add a "Ethernet" prefix and avoid conflicts with other networking libraries. In particular, "Client" is now "EthernetClient", "Server" is "EthernetServer", and "UDP" is "EthernetUDP". A new IPAddress class makes it easier to manipulate those values. * The UDP API has been changed to be more similar to other libraries. Outgoing packets are now constructed using calls to the standard write(), print(), and println() functions – bracketed by beginPacket() and endPacket(). The parsePacket() function checks for and parses an incoming packet, which can then be read using available(), read(), and peek(). The remoteIP() and remotePort() functions provide information about the packet’s origin. (Again, thanks to Adrian McEwen for the implementation.) * The Wire library has also been modified to use the standard read() and write() functions instead of send() and receive(). You can also use print() and println() for outgoing data. * The SD library now supports multiple simultaneous open files. It also provides the isDirectory(), openNextFile(), and rewindDirectory() functions for iterating through all the files in a directory. (Thanks to Limor Fried.) [boards / firmwares] * Added the Arduino Mini w/ ATmega * Added Windows drivers (.inf files) and 16U2 firmware (.hex files) for the rev. 3 boards (Uno, Mega, and Mega ADK). [internals] * The WProgram.h file, which provides declarations for the Arduino API, has been renamed to Arduino.h. To create a library that will work in both Arduino and Arduino , you can use an #ifdef that checks for the ARDUINO constant, which was 22 and is now For example: #if defined(ARDUINO) && ARDUINO >= #include "Arduino.h" #else #include "WProgram.h" #endif * The write(), print(), and println() functions in Stream now return a size_t (instead of void). This indicates the number of bytes actually written by the function. Any classes that inherit from Stream will need to change accordingly. Additionally the write(str) function has been given a concrete implementation – it calls write(buf, len) - so sub-classes don't need to (and shouldn't) implement it. * There are new abstract base-classes for Client, Server, and UDP to provide portability across networking libraries. * The pin definitions for the Arduino boards (i.e. the mappings from pin numbers to port register / bit pairs) is now stored in a sub-folder of a new variants/ folder in the hardware folder. The variant to use for a given board is specified by the cromwellpsi.comt preference in the cromwellpsi.com file. * The new, variant-specific pins_arduino.h files now provides additional macros with information about the characteristics of the board (e.g. the locations of the SPI and TWI pins, and the number of digital and analog pins). * The avrdude included with the Mac and Windows versions of the Arduino software has been upgraded to avrdude (from an Arduino-specific version of avrdude ). The software now uses the "arduino" programmer type in place of "stkv1" for uploading to most Arduino boards. ARDUINO - * Added .inf files for R3 boards. * Updated to optiboot * Included combined firmwares for ATmega16U2. ARDUINO - [core / libraries] * Adding an SD card library based on sdfatlib by Bill Greiman and the MemoryCard library by Philip Lindsay (follower) for SparkFun. cromwellpsi.com * Added character manipulation macros (from Wiring): isAlphaNumeric(), isAlpha(), isAscii(), isWhitespace(), isControl(), isDigit(), isGraph(), isLowerCase(), isPrintable(), isPunct(), isSpace(), isUpperCase(), isHexadecimalDigit(), toAscii(), toLowerCase(), toLowerCase(). cromwellpsi.com?id= * Added cromwellpsi.com() function. * Refactoring core to use register-based, not CPU-based, #ifdefs. Patch by Mark Sproul. cromwellpsi.com?id= cromwellpsi.com?id= cromwellpsi.com?id= cromwellpsi.com?id= cromwellpsi.com?id= cromwellpsi.com?id= * Modification of serial baud rate calculation to match bootloader and 8U2 firmware at baud. cromwellpsi.com?id= * Fixed bug in tone() function. cromwellpsi.com?id= * Fixed cromwellpsi.comckDivider() function. cromwellpsi.com?id= * Fixed EEPROM library on Mega cromwellpsi.com?id= * Hardware serial receive interrupt optimization. cromwellpsi.com?id= * Applying the timeout parameter of pulseIn() during measurement of the pulse, not just while waiting for it. [environment] * Fixed problem with copy as html and angle brackets. cromwellpsi.com?id=29 * Showing serial port selection dialog if serial port not found on upload. * Remembering serial monitor window size and line ending selection. cromwellpsi.com?id=96 cromwellpsi.com?id= * Replaced cromwellpsi.com regular expressions with cromwellpsi.com ones (patch by Eberhard Fahle and Christian Maglie). cromwellpsi.com?id= * Building the user sketch before the core or libraries, so errors appear faster. Patch by William Westfield and Paul Stoffregen. cromwellpsi.com?id= * Setting application icon under Windows. ARDUINO - * Modifying VID / PID combination in 8U2 firmwares. * Fixing analogWrite() bug on pins 9 and 10 (Arduino Uno). * Patched RXTX to include /dev/ttyACM* on Linux. ARDUINO - * Added support for the Arduino Uno and Arduino Mega * Including ATmega8U2 firmware used by Uno and Mega * Including source code to optiboot bootloader used by the Uno. * Including source code to the stkv2 bootloader used by Mega * New application icon (by ToDo). ARDUINO - [core / libraries] * Revised Ethernet library (by Christian Maglie). This depends on the new SPI library, so existing sketches will need: #include <SPI.h> added to the top of their code. * Added an SPI library (by Christian Maglie). cromwellpsi.com?id= * Added aliases for the analog input pins: A0, A1, etc. cromwellpsi.com?id= * Added a String class. * Added a shiftIn() function (from Wiring). cromwellpsi.com?id= * Updated version of Firmata supports Mega and capability querying. * More accurate delay() function from BenF. cromwellpsi.com?id= * Re-enabling PWM after tone() ends. cromwellpsi.com?id= * Added cromwellpsi.com() method. cromwellpsi.com?id= * Added Stream base class to Serial object (w/ available(), read() and the write(), print(), and println() functions from the Print class). cromwellpsi.com?id=60 * Disabling interrupts while digitalWrite() and pinMode() write to pins. cromwellpsi.com?id= * Replacing INTERNAL analog reference with INTERNAL1V1 AND INTERNAL2V56 on the Arduino Mega. cromwellpsi.com?id= [environment] * Added Arduino Fio to the boards menu. * Added Arduino Pro and Pro Mini (5V / 16 MHz) to the boards menu. cromwellpsi.com?id=81 * Synchronized with the Processing code base, bringing various changes. * Modified the parsing of avr-gcc / avr-g++ output and error messages. * Toggling RTS on upload for auto-reset with FTDI cables on Linux. cromwellpsi.com?id= * Adding control over scrolling in serial monitor. cromwellpsi.com?id=97 * Added drop-down for selecting line endings to the serial monitor. cromwellpsi.com?id= * Fixed problem with tabs of the same name but different extensions. cromwellpsi.com?id= * Allowing third-party hardware platforms to reference programmers defined in other platforms. cromwellpsi.com?id= [examples] * Re-organized and numbered for easier access and better progression. ARDUINO - [core / libraries] * Added tone() and noTone() functions for frequency generation. * Added cromwellpsi.com() command. * Added precision parameter for printing of floats / doubles. * Incorporated latest version of Firmata. * Fixed bug w/ disabling use of the RW pin in the LiquidCrystal library. * No longer disabling interrupts in delayMicroseconds(). * Fixed bug w/ micros() returning incorrect values from within an interrupt. * Fixed bug that broke use of analog inputs on the Mega. [environment] * Synchronized with the Processing code base, bringing various fixes, including to a bug causing saving to fail when closing the last sketch. * Added support for third-party hardware in the SKETCHBOOK/hardware folder, mirroring the current structure of the hardware folder in Arduino. * Added Ctrl-Shift-M / Command-Shift-M shortcut for serial monitor. * Hold down shift when pressing the Verify / Compile or Upload toolbar buttons to generate verbose output (including command lines). * Moving build (on upload) from the applet/ sub-folder of the sketch to a temporary directory (fixing problems with uploading examples from within the Mac OS X disk image or a Linux application directory). * Fixed bug the prevented the inclusion of .cpp and .h (or .c and .h) files of the same name in a sketch. * Improved the Mac OS X disk image (.dmg): added a shortcut to the Applications folder, a background image with arrow, and new FTDI drivers. ARDUINO - [documentation / examples] * Many new and revised examples from Tom Igoe. [core / libraries] * Updated LiquidCrystal library by Limor Fried. See reference for details. * Updated Firmata library to version (rev. 25). * Replaced the Servo library with one (MegaServo) by Michael Margolis. Supports up to 12 servos on most Arduino boards and 48 on the Mega. * Improving the accuracy of the baud rate calculations for serial communication (fixing double-speed problems on 8 MHz Arduino boards). Thanks to gabebear. [environment] * Synchronized with the Processing code base (rev. ), bringing many improvements (listed below). * New icons and about image by Thomas Glaser (envis precisely). * Support for multiple sketch windows. * The serial monitor now has its own window. * Comment / Uncomment menu item (in Edit) and keyboard shortcut. * Increase and Decrease Indent menu items (in Edit) and keyboard shortcuts. * Support for third-party libraries in the SKETCHBOOK/libraries folder. * Libraries are now compiled with the sketch, eliminating the delay when switching boards and the need to delete .o files when changing library source code. * Arduino now comes as an app file (in a dmg) on the Mac. * Adding the Arduino Nano w/ ATmega to the Tools > Board menu. ARDUINO - [documentation / examples] * New communication examples (w/ corresponding Processing and Max/MSP code) by Tom Igoe. [core / libraries] * Adding support for the Arduino Pro and Pro Mini V / 8 MHz w/ ATmega * Adding support for the LilyPad Arduino w/ ATmega * Adding write(str) and write(buf, size) methods to Print, Serial, and the Ethernet library Client and Server classes. This allows for more efficient (fewer packet) Ethernet communication. (Thanks to mikalhart.) * Improvements to the way the Ethernet library Client class connects and disconnects. Should reduce or eliminate failed connections and long timeouts. (Thanks to Bruce Luckcuck.) * Optimizing the timer0 overflow interrupt handler (used for millis() and micros()). Thanks to westfw and mikalhart. * Fixing bug that limited the bit() macro to 15 bits. Thanks to Paul Badger. * Adding ARDUINO version constant (thanks to prodding from mikalhart). [environment] * Ordering the items in the Tools > Board menu. * Adding "Copy as HTML" command to the Tools menu. * Eliminating (maybe) the occasional "Couldn't determine program size" errors. Thanks to the Clever Monkey. * Moving selection of Linux look-and-feel into the arduino script so it can be changed by users. Thanks to Eberhard Fahle. [tools] * Adding automatic dependency generation to the Makefile. (Lars Immisch) ARDUINO - [core / libraries] * Adding support for the Arduino Mega (ATmega). [environment] * Reinstating use of core.a library in the build process, slightly shrinking compiled sketch sizes. (Thanks to William Westfield.) * Fixing bug in copy for forum (thanks to eried). ARDUINO - [core / libraries] * Fixing bug that prevented multiple outgoing Client connections with the ethernet library. [environment] * Clarifying ATmega vs. ATmega in the Tools > Boards menu. [tools] * Updating the Mac OS X AVR tools to AVR MacPack This includes avr-gcc , which should fix problems with functions called from within interrupts. ARDUINO - [documentation / examples] * Adding examples for Parallax Ping Sensor and Memsic accelerometer. [core / libraries] * Adding support for the ATmega The upload speed is baud, so you may need to edit cromwellpsi.com or reburn your bootloader if you bought an ATmega w/ bootloader from adafruit or other supplier. * Adding support for printing floats to Print class (meaning that it works in the Serial, Ethernet, and LiquidCrystal classes too). Includes two decimal places. * Added word, word(), bitRead(), bitWrite(), bitSet(), bitClear(), bit(), lowByte(), and highByte(); see reference for details. * Working around problem that caused PWM output on pins 5 and 6 to never go to 0 (causing, for example, an LED to continue to glow faintly). * Removing cast macros, since function-style casts are a feature of C++. This should fix contributed libraries that broke in Arduino * Modifying pulseIn() to wait for a transition to start timing (i.e. ignoring any pulse that had already started when the function was called). * Fixing bug in random() that limited the ranges of values generated. Thanks to Mikal Hart. * Modifying delay() to pause for at least the given number of milliseconds. * Fixing bug in Ethernet library that interfered with use of pins 8 and 9. * Originating each outgoing network connection from a different port (in the Client class of the Ethernet library). Thanks to Paul and joquer. * Updating ATmega bootloader to work with standard distributions of avrdude (responding to signature requests made with the universal SPI command) and correctly store EEPROM data. Thanks to ladyada. [environment] * Omitting unused functions from compiled sketches, reducing their size. * Changing compilation process to allow for use of EEMEM directive (although not yet uploading EEPROM data). ARDUINO - * Added Arduino Nano to the boards menu. * Arduino Pro or Pro Mini (8 MHz) to the boards menu. * Added Firmata library by Hans Steiner and others. This provides a standard protocol for communicating with software on the computer. * Added an Ethernet library for use with the Arduino Ethernet Shield. * Added a Servo library based on the work of Jim Studt. * Added a LiquidCrystal library based on the work in the playground. It supports both 4- and 8-bit modes. * Improved millis(): it now overflows after 49 days instead of 9 hours, but now uses slightly more processing power. * Fixed reversing direction bug in Stepper library. (Thanks to Wayne Holder.) * Moved insertion of #include <WProgram.h> to after any comments and #include statements in the main sketch file. This means that an #include <stdlib.h> now works. * Upgraded to newer versions of avr-gcc () and avr-libc (). This provides support for newer Atmel chips, but may increase the size of sketches. * Allowing per-board specification of the cromwellpsi.com preference, allowing upload via bootloader to some boards and via a programmer to others. * Added return values to some functions in the Wire library to allow for better error handling. * Fixed random() to work with long values. * Creation of an abstract Print base-class to allow Serial, SoftwareSerial, and LiquidCrystal to share code for print() and println(). * Incorporated ladyada's watchdog timer mods to the bootloader source, but only compiling them in for the Pro and Pro Mini (because they are included in the bootloader being burned on the boards by SparkFun). ARDUINO - * Fixed Find in Reference. * Added map() function for mapping values from one range to another. * Added analogReference() function. * Added interrupts() and noInterrupts() functions. * Added degrees() and radians() functions. * Added timeout parameter (in microseconds) to pulseIn(); default is 1 second. * Support for uploading sketch using a programmer. * Improved detection of functions that need prototyping. * Placing function prototypes after #include's and #define's. * No longer moving #include statements to the top of the sketch. * Can now drag .pde files onto the Arduino dock icon on Mac OS X. Thanks to Peter Sgouros. * New script for downloading the reference from Tom Pollard. Thanks Tom! * Miscellaneous Mac OS X and other patches from Wim Lewis. Thanks Wim! * Updated Mac OS X FTDI drivers. ARDUINO - * Support for the LilyPad Arduino. * Vista support. * Mac OS X universal distribution. * Printing! * Copy for discourse. * New Board menu replaces the Microcontroller menu. * New Burn Bootloader menu offers a choice of programmers. * New and improved keyboard shortcuts. * Fixed some find/replace bugs. * Better auto-format. * Improved error messages when uploading. * Support for COM10 and higher on Windows. * Fixed automatic refresh of the Serial Port menu under Windows. * Quaqua look-and-feel on Mac OS X. * Reorganization of the Arduino application directory. ARDUINO - * Added support for the Arduino Diecimila. * Switched to using avrdude (instead of uisp) for uploading sketches. * Added the ability to burn NG and Diecimila bootlaoders (with an AVRISPmkII). * Fixed a bug in SoftwareSerial (a hardware serial function was being called instead of the software serial equivalent). Thanks to brianbr for the report and fix. ARDUINO - * Updated examples (in distribution and on the website). * Added an EEPROM library (see reference for details). * Added a Stepper motor library (see reference). * Patched to reduce binary sketch sizes by building the Arduino core as a library (.a) file - now only the needed parts of the core are linked into a sketch. Originally written by Nicolas Roland, revised by Don Cross. * Fixed bug in cromwellpsi.comble(). Report and fix by Don Cross. * Now recompiling libraries when switching microcontrollers. Report by Julian Bleecker; fix by Nicholas Zambetti. * Cleaned up core functions: moved pin definitions into program space to save RAM, and other minor improvements. Contributed by Jim Studt. * Lots of reference additions and fixes from Paul Badger. * Changed default microcontroller to ATmega from ATmega8. * Removed the delay from analogRead(). * Activating TWI/I2C pullup resistors on the ATmega (in addition to the ATmega8). ARDUINO - * Smaller core (about KB instead of KB). * Added a SoftwareSerial library (thanks to Antonio, Heather Dewey-Hagborg, and bigengineer for their help). * Implemented a cromwellpsi.com() routine; see reference for details. * Digital pins 0 and 1 can be used for i/o until a call to cromwellpsi.com(). * Replaced avr-lib's uart routines with custom code for handling serial communication and modified C++ serial commands to call the C serial commands; the code may behave slightly differently in border cases (e.g. non-standard speeds, or on overflow). * Added attachInterrupt() and detachInterrupt() functions for handling of external interrupts on pins 2 and 3. * Implemented shiftOut() routine; see reference for details. * Defining binary constants: e.g. B is 6. * Mac versions no longer require running of the macosx_cromwellpsi.comd script. * Windows version comes with the FTDI USB drivers already unzipped. * New Linux binary distribution (still requires some programs to be pre-installed). ARDUINO - * Mac version no longer requires Java , meaning it should run on * Added support for analog inputs 6 and 7 and pwm on pins 5 and 6 on the on the ATmega used in the Arduino Mini (extra analog inputs not available in DIP ATmegas). * You now select the baud rate for the serial monitor from within the editor status bar when the serial monitor is running instead of from the Tools menu. * Pressing enter within the serial monitor edit box no longer appends a newline to the message sent to the board. * Included the Wire (TWI) library from Wiring. * Updated the reference. ARDUINO - * Applied patch from Hans Steiner to improve Linux support by searching for avr tools in the user's path instead of expecting them at a fixed location. * Added an cromwellpsi.come preference for help in debugging. * ATmega support! * New Wiring-compatible randomSeed(), random(max) and random(min, max) functions (except operating on longs instead of floats). * Fixed bug that sometimes caused uploading of old versions of a sketch. * Serial monitor nows include an interface to send messages to the Arduino board. Pressing return appends a newline, pushing the send button doesn't. * Now displaying "burning bootloader" and "compiling" status messages. ARDUINO - * Main sketch is now compiled as C++ (instead of C). * Updated avr toolchain. * printInteger(), printHex(), etc. now handle longs. * millis() fixed (now overflows after days, not minutes) * Fixed path to java in Windows cromwellpsi.com * Added Matrix and Sprite libraries (written with Nicholas Zambetti). * PWM now working on pin 11 (in addition to pins 9 and 10). * Slowed PWM frequency (on all three PWM pins) to 1KHz. * Now give an error if compiled sketch is too big. * Fixed abs(), min(), max(), and constrain() macros. * Added menu items to the IDE to burn bootloader. * Now display binary sketch size on upload, and give error if too big. * Added C++ serial library. * Resynced with Processing/Wiring IDE code (improved auto-format, faster logging to serial monitor console, other bug fixes) * New library system. * Updated to latest version of the RXTX serial library; Mac users will need to rerun macosx_cromwellpsi.comd. ARDUINO - API Changes * Reversed the analog input pins to correspond to newer boards. This means a call, for example, to analogRead(0) must be changed to analogRead(5) in order to read the same physical pin. * Added a printNewline() function (which sends '\n' = ASCII 10). New Stuff * Reference is included (features native to C not yet documented). * Serial monitor added (click the toolbar button to turn it on or off). Baud rate is controlled by the Serial Monitor Baud Rate Menu, defaults to Icon and implementation from Wiring. * Serial port menu now automatically refreshes when opened. * New blue color scheme and icons courtesy of Noah Shibley (colors are hardcoded into the source to ensure consistency with image files). * Keyspan and FTDI USB drivers included with Mac and Windows distributions. Bug Fixes * millis() now updates every millisecond instead of every second. * Bootloader included with Windows distribution (it was already in the Mac dist). * Updated icon of the Windows executable. * Now flushing the serial port before uploading (should fix some errors). * Improved accuracy of the delayMicroseconds() function. Other * Upload rate no longer selectable from a menu within the IDE. Instead, edit the cromwellpsi.comad_rate item in the cromwellpsi.com file. * Created Xcode project for building Arduino on the Mac (doesn't yet regenerate the grammar files or package the distribution); active target should be "App". * Removed unused or unimplemented items from menus. ARDUINO - * New build process no longer uses makefiles; now controlled by cromwellpsi.com * core/ replaced with targets/; can now link against Wiring libraries. * Replaced print() with printString, printInteger, printHex, printByte, etc. * Added menu for selecting serial port speed. * Updated icon. * Bootloader shrunk to less than 1 KB; fuses updated accordingly. * Added serialRead(), serialAvailable(), and delayMicroseconds(). ARDUINO - * This is the first released of the unified IDE + language library it's a terrible hack but it works. at the moment it's in alpha stage but it can be used to work. * The processing preprocessor is included but not used.

Источник: [cromwellpsi.com]

What’s New in the IX 1.6.13 serial key or number?

Screen Shot

System Requirements for IX 1.6.13 serial key or number

First, download the IX 1.6.13 serial key or number
You can download its setup from given links:

Download link

Tags:LView Pro serial key or number Omnisphere serial key or number IDM UltraEdit 14.10.0.1018 serial key or number 3D Box Maker Pro 1.1 Build 112005-17 serial key or number Nero Burning Rom V6.6.0.12 ultra edition serial key or number Boris FX 7 serial key or number Windows 7 Home Premium OEM serial key or number photoshop cs3 serial key or number Adobe Acrobat 2017 keygen,serial,crack,generator,unlock

Apple MacBook Air "Core i5" 13" (Edu Only) Specs

Download Teensyduino, Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version

Version B

Version

Version

Version

Version

Version

Version

Version

Version

Known Issues

Credits

Arduino Software Release Notes

What’s New in the IX 1.6.13 serial key or number?

Screen Shot

System Requirements for IX 1.6.13 serial key or number

Related Posts

About Author

admin

Add a Comment